Product Description
Product Model | YL-S |
Standard | Meet EN361 & ANSI Z359.1 |
Material | 100% high tenacity polyester |
Width | 45mm |
Webbing Strength | 30KN(6500lbs) |
Color | as customer requires |
Size | Free size |
Features | 1)with 1 stamping D-rings and 4 adjustable points |
Application
Full body harness is used for a variety of activities, including construction work, rescuing, firefighting, rock climbing, shipbuilding and bridge working, etc. It helps to prevent injury or death from fall.
Packaging
Every piece packed in bag or color box. Costs for different packing are with a little bit difference.
We Have More Models of Full Body harness
Features of Full Body Harness
1. Full body harness is designed as body support primarily for fall arrest purposes, i.e. a component of a fall arrest system and complies with EN361:2002.
2. Features for Basic Equipments:
-Back attaching buckle- for attaching fall arrest system;
-Connecting and adjusting buckle- for comfort wearing and using of harness
-Soft waist pad- for long time suspending working
-Tongue Buckle Waist Belt and leg strap- for quick adjustment
3.Service Life and Tips:
Full body harness can be used for 5 years counting from the date of putting the harness into operation.
After this period the harness must be withdrawn from use to carry out manufacturer's detailed inspection. Check before use each time, keep in dry and avoid the sunlight.
How to Put on Full Body Harness
1.Take the harness out from the packing, holding it by the dorsal tightening ring.
2.Wear the harness by slipping on the shoulder straps one after one, taking care not twist them.Adjust them by pulling or releasing the slack end, so that the buttock strap is firmly in place under the buttocks. Pull one and the other thigh strap through the crotch and latch each strap. Make sure not to cross the straps.
3.Attach the chest strap and adjust its tension to hold the shoulder straps centered on each shoulder. Check that the belts would not be wrapped up themselves.
4.Adjust the harness by pulling and releasing the free end of the belt, so that the belts would be well tight and at the same time would not prevent free movements.
5.The adjustment should be effected by checking that the dorsal ring would be positioned between the shoulder blades or frontal tightening connector would be positioned at the height of the breastbone and that the sitting belt would be correctly positioned.
6.For the frontal tightening, the connector of the two back eyes should be in compliance with the norm EN362, always connected to both eyes and locked. It is always recommended its use, even if you are using the dorsal tightening ring.
Harness is put on correctly if:
-All straps are correctly adjusted (neither too loose nor too tight).
-Back attaching buckle is correctly positioned at the level of the shoulder blades.
-Front chest strap is correctly positioned at the middle of the chest.
-The ends of all the straps must be kept by plastic loops.
Since 2001, we have been specializing in the field of Lashing Equipment and Lifting Equipment. Our main products are Cargo Lashings, Webbing Slings
and Round Slings, etc. In the meantime, we timely develop new products in relevant field to meet market demands, such as Cargo Nets, Edge Protectors
and Safety Harness, etc.
All products are produced under strict standard of quality control, and constant research and development ensuring that you will get the latest products
produced with the most advanced and cost effective technologies. Most of our products are CE and GS certified. We are confident that our products and
service will satisfy the highest standards of requirements.
View more>>
Advanced Equipment
Some of Our Customers
Certificates
Contact Me
I am waiting to offer my best service to you. Your inquiry and questions are all welcomed. Pls free feel to contact me.
Tracy Zou
Tel: +86 571 85357821
Fax: +86 571 85356171
Trademanager: cn1510183174
Skype: sales2_191
Before we quote accurately, we need to know:
1.Quantity you need
2.The models you are interested in
3.Packaging requirements
4.Trade Term: FOB, CIF,CNF, or else