Taiwan Brand Second hand Rubber Dispersion Kneader on sale.
Used Rubber Dispersion Kneader produced in Taiwan on sale.
Old Rubber Dispersion Kneader made in Taiwan on sale.
Brand: KNEADER (Taiwan)
Age:4 years
Condition: Normal operation.
Technical Parameters: |
|
- Model | X(S)N-75L |
- Total Chamber volume | 180L |
- Working chamber capacity | 75L |
- Rotor | 2 Wing Type |
- Rotor speed | 32 : 25 RPM |
- Friction Ratio | 1.28 : 1 |
- Input Motor | 110 KW |
- Main Motor voltage | 380V |
- Batch weight | Approx. 75-120 kg |
- Mixing Cycle Time | Approx.8- 12 mins. |
- Discharge Door | Front opening type |
- Charging Door | Back door feed |
- Working Air pressure of Ram | 0.6-0.8 MPa |
- Ram pressure on compound | 0.38 – 0.51 MPa |
- Cooling arrangement | Required for Rotors /Chamber/Ram |
- Tilting Motor | 4 KW geared brake motor with planetary gearing |
- Tilting angle | 140 degree |
- Rotor | Steel cast machined and hard chrome plated |
- Side Board | Steel cast machined and hard chrome plated |
- Main chamber | Steel cast finish machined with Thermocouple &Sensor |
- Top lid/Pressure lid | Steel cast duly finish machined |
- Pneumatics | Suitable for 6 to 9 Kg/cm2 air pressure control /interlock |
- Rotor Seals | By-Mechanical Seals with double combination sealing |
- Reduction Gear | Multistage, Hardden Gear Reduction Gearbox |
- Dimension (mm) | L3800xW2140xH3180 |
- Weight (Kg) | 5000 |
Accessories |
|
a) Rotor seals: 2 sets |
|
b) Pneumatic cylinder: 2 sets |
|
c) Lubrication gun: 1 set |
|
d) Solenoid valve and pressure gauge: 1 set |
|
e) Travel switch: 1 PCS |
|
f) Tools set: 1 set |
