Reliable and popular of japanese SMC red tube ,Nylon tubing,air cylinder tube for manufacture using SMC,KOGANEI,CKD
Nylon was developed more than half a century ago and is considered to be the first man-made thermoplastic available.
Deemed a rugged engineering plastic, its properties make it an ideal chooice for a variety of applications.
Nylon does not depend on moisture for flexibility and will not become brittle or swell because of water.
There fore, it has excellent low moisture absorption and dimensional stability characteristics.
Nylon tubing for pneumatic applications is made from Nylon 11, and more recently Nylon 12.
Nylon 12 has virtually the same physical properties and peformance as Nylon 11.
SMC mainly uses Nylon 12.
Nylon 11 is oiffered by request.
Properties
◊Dimensional stability
◊Low moisture absorption
◊Elastic memory
◊High impact resistance
◊High thermal resistance
◊Light weight
◊Wide temperature range
◊High abrasion resistance
◊Good flexbility
◊Broad chemical resistance
Dimensions
inch Series TIA
| Model | TIA01 | TIA05 | TIA07 | TIA11 | TIA13 | ||
| Tube OD(Inches) | 1/8 | 5/32 | 3/16 | 1/4 | 5/16 | 3/8 | 1/2 |
| Tube ID(Inches) | 0.086 | 0.098 | 0.137 | 0.18 | 0.236 | 0.275 | 0.378 |
| Min.bending radis(Inches) | 0.59 | 0.51 | 0.79 | 1.18 | 1.89 | 2.36 | 2.95 |
Specificatons
| Operating Fluid | Air,water |
| Max.Operatimg Pressure | 220 psi(1.5MPa)at 68 at 68°F(20℃) |
| Burst Pressure | Refer to burst pressure characteristic chart |
| Operating Temperature | Air -4° to 140°F(-20°to 60℃) Water -40°to 105°F( 5 to 40℃) |
| Material | Nylon 12 |
| Hardness | Shore D 70 |
Caution
1 Can be used with general industrial warter.
For other fluids,please consault SMC.
2 Max operating pressure and minimum bending radius are measured at 68°F
3 When using tubing with SMC fittings,the chemical resistance of the fitting has to be investigated as well.
T-TIA Nylon Tubing
TU-TIUB Polyuretane Tubing
TUH Hard Polyurethane Tubing
TCU Polyurethane Coil Tubing
TRS FR Soft Nylon Tubing
TRBU FR Double Layer Polyurethane Tubing
TRTU FR Three-layer Polyurethane Tubing
TAS Antistatic Soft Nylon Tubing
TL/TIL Fluoropolymer Tubing
TH/TIH FEP Tubing(Fluoropolymer)
TPH Polyolefine Tubing
TS-TISA Soft Nylon Tubing
TUS Soft Polyurethane tubing
TUZ Wear Resistant Tubing
TFU Polyurethane Flat Tubing
TRB FR Double layer Tubing
TKS Double Layer Tube Stripper
TQ 2-Layer Soft Fluoropolymer Tubing
TAU Antistatic Polyurethane Tubing
TLM/TILM Fluoropolymer Tubing(PFA)
TD/TID Soft Fluoropolymer Tubing
TPS Soft Polyolefin Tubing
Other SMC Product
----------------Brand handled-------------------------------------------------
Cutting Tools
MITSUBISHI MATERIALS
TUNGALOY
KYOCERA
OSG
SUMITOMO
Drills
IWAHASHI
YAMAWA
SANDVIK
OMI
MIYANAGA
MURAKI
TRUSCO
Tooling Fixturing
BIG DAISYOWA SEIKI
BIG
Magnets
KANETEC
NOGA JAPAN
MAGNA
SK
Mesuring Tool & Test Instruments'
SHINWA
NAKAMURA MFG
MITUTOYO
NIGATA SEIKI
MIGISHITA SEIKI
AICHI TOKEI DENKI
RIKEN KEIKI
HIOKI E.E.
SANWA
NAGANO KEIKI
DAIICHI KEIKI
TOKYO SEIMITSU
TGK
Fitting & Tubing
PISCO
CKD
SMC
MYOTOKU
CHIYODA TSUSYO
TAIYO
Filters
KANAI JUYO KOGYO
NIHON FILTER
3M
Deeping & Ball Bearings
NTN
EVER-ON
OILES
KATAYAMA CHAIN
TSUBAKIMOTO CHAIN
THK
NIDEC-SHIMPO
MITSUBOSHI BELTING
NIPPON BEARING
Machine Tools
IMAO
NOK
ORI & MEC
KOHO KOSAN
SUGATSUNE
INOAC
Electronic Parts
IDEC
AIHARA DENKI
PATLITE
HOZAN