Specifications
EP350 circle endless conveyor belt1.plies:1-10ply
2:width:100-3000mm
3.thickness:4-50mm
EP350 circle endless conveyor belt
One of three methods are used to make belts endless:
1 vulcanized splice
2 mechanical splice using fasteners or lacing.
3 cold bond splicing.
Standards:
GB/T7984-2001, DIN22102, BS490, AS1332, RMA, JISK6322, SABS1173 etc.
Models:
EP Nylon canvas steelcord, pvg,pvc, sidewall conveyor belt
The physical and mechanical properties of nylon conveyer belt and EP conveyer belt are as following:
1. The physical and mechanical properties of coverffig layer: please refer to the physical and mechanical properties of the common conveyer belt.
2. Tensile property of through thickness:
a. The longitudinal tensile strength is not lower than the following nominal value:
315 400 500 600 630 8OO 9OO 1000N/mm
b. The through thickness elongation rate of the belt should not less than rate of trough thickness of the belt should no more than 4%.
c. Straightness: no more than 25mm.
d. plunger bond strength:
Index Description | Strength between layers | Cover layer and fabric layer | |
Thickness of cover layer≤1.5mm | Thickness of cover layer >1.5mm | ||
Sample average value | 4.5N/mm | 3.2N/mm | 3.5N/mm |
Fabric Material | Fabric structure | Fabric code | No.of fabric plies | Width mm | Length | Cover thickness mm |
| |||
Warp | Weft | |||||||||
Top | Bottom |
| ||||||||
Polyester canvas | Polyester | Nylon of Polyester | EP100 | 2-10 | 350-2000 | 10-400 | 2-12 | 1-5 |
|
|
EP150 | 2-10 | 350-2000 | 10-400 | 2-12 | 1-5 |
|
| |||
EP200 | 2-10 | 350-2000 | 10-400 | 2-12 | 1-5 |
|
| |||
EP250 | 2-10 | 350-2000 | 10-400 | 2-12 | 1-5 |
|
| |||
EP300 | 2-6 | 350-2000 | 10-400 | 2-12 | 1-5 |
|
| |||
EP400 | 2-6 | 350-2000 | 10-400 | 2-12 | 1-5 |
|
| |||
EP500 | 2-6 | 350-2000 | 10-400 | 2-12 | 1-5 |
|
| |||
EP600 | 2-4 | 350-2000 | 10-400 | 2-12 |
|
|
| |||
