Hotrain FD2 External Standard SIM Card Interface High Speed Router
This document describes the electrical characteristics, radio frequency performance, dimensions and application environment of the FD2. Under the introduction of this document, end users or developers can quickly understand the hardware functions of FD2.
FD2 is a 5G CPE product that accesses the Internet through 5G mobile communication dial-up or 1000Mbps WAN port dial-up, and then shares the Internet network through wireless WiFi 6 and 1000Mbps wired LAN.
Relevant Standard Specifications:
l USB3.0/USB2.0 bus standard
l PCI- Express bus standard
l SIM/USIM interface standard
l IEEE802.11n/g/b/a/ac/ax
l IEEE802.3/802.3u/802.ab
l PCI Express M.2 Specification Rev1.1
l 5G mobile communication standard, which is determined by the selected 5G mobile communication module
Main Features of the Product:
l Adopt IPQ8072A scheme, 4-core ARM Cortex A53s CPU, main frequency up to 2.2 GHz
l Use independent WIFI chip, 2.4G is QCN5024, 5.8G is QCN5054
l 2.4G rate up to 1147Mbps, 5.8G rate up to 2402Mbps, both support MU-MIMO
l High-speed 1GB DDR4, with 8MB Nor Flash and 256MB EMMC storage
l 1WAN, 2LAN full 1000M adaptive network ports, support auto flip (Auto MDI/MDIX)
l Built-in 1 M.2 standard interface, which can be used to connect to 5G mobile communication module
l External standard SIM card interface, support SIM/USIM card
l Built-in high-gain omni-directional antenna, wireless signal 360 degrees without dead angle
l 5G module power supply is independently controlled through GPIO
l IPQ8072 comes with a watchdog function, which automatically restarts in extreme cases of crash
l All LED lights can be turned off with one key
Power Supply and Power Consumption Description:
Test Condition | Minimum | Rated Value | Maximum | Unit | |
Operating Voltage | T A = 25°C | 6 | 12 | 14 | V |
Absolute working voltage | T A = 25°C | 5.5 | 16 | V | |
Working current | VIN=12V,T A = 25°C | 0.8 | 1.5 | 2 | A |
Please use the ZBT standard power adapter to supply power to this product. If the ZBT standard power supply is not used, please supply power to this product in strict accordance with the above power specifications, otherwise the product will be damaged. If you use a battery or vehicle power supply to supply power, be sure to take anti-static and anti-surge countermeasures.
Introduction of Structural Parameters and Accessories:
Weight (KG) | TBD | |
Shell size | TBD | |
Color scheme | Black | |
Accessories | Power adapter | 12V/2.0A 1PCS |
Instruction | 1PCS | |
Certificate of approval | 1PCS | |
Network cable | Category 5 network cable 1PCS | |
SIM card holder | 1PCS |
Product Working Environment Requirement:
Working temperature | 0℃ ~ 40℃ |
storage temperature | -40℃~ 70℃ |
Working humidity | 10% ~ 90%RH non-condensing |
Storage humidity | 5% ~ 90%RH non-condensing |
Shaanxi Fatego Network Technology Co., Ltd
Address: 22F/C Building, Fuerdun International Finance Center, Xi'an, China
Post code: 710000
Contact: Stone
Email: ftg_blue@163.com shiyuzhen@ihotrain.com
Phone: + 86 13319200202
Contact: Eva
Email: evaliu@ihotrain.com
Phone/Whatsapp: +86 17316608049
Contact: Maria
Email: mariama@ihotrain.com
Phone/Whatsapp: +86 15091488273