SR14D-3 model 14ton Double Drum Vibratory Road Roller
USD $104,789 - $104,789
Min.Order:1
Newindu Construction Engineering (Shanghai) Co., Ltd.
Construction Machinery 14ton Single-Drum Vibratory Asphalt Road Roller SR14MA at Good Price
16ton Full Hydraulic Road Roller Compactor Shantui SR16 for Sale
Shantui Construction Machine Vibratory Road Roller SR18 Roller for Sale
Shantui Road Machine small 18Ton Single Drum Road Roller Vibratory SR18M
20ton Road Roller Shantui SR20-5 Single Drum Vibratory Compactor
SR14D-3 model 14ton Double Drum Vibratory Road Roller
Power system
Cumns QSB4.5 engine featuring high power output, reliable performance, economical and fuel consumption. It adjusts itself to idle speed in non-working status so as to save fuel. The temperature-control fan and load sensing system reduces fuel cost.
Vibration system
Vibration system of SR14D-3 roller has two frequencies, 51Hz and 67Hz. Operation efficiency is 34% improved. In addition, the small amplitude of 0.3mm is applicable to compaction of thin layer and pavement of bridge while the large amplitude of 0.8mm is applicable to compaction of thick layer. Compaction efficiency is improved.
The electric hydraulic control system is composed of imported elements with advanced design and control technologies to ensure proper time of starting vibrating and stop vibrating and even compaction.
Spray system
The 110L large water tank prolongs operation time. The tank is provided with two filling holes and two drain holes.
Cab
Wide and bright cab provides comfortable driving and broad view of sight.
The operation panel can slide to turn for 180° to meet operator’s requirement.
High solution display clearly shows water level, oil level, water temperature, oil temperature and frequency, ensuring easy operation.
View of sight
SR14D-3 provides broad view of sight and comfortable driving for operator.
High operation quality
Consistent amplitude of drums and staggered layout of vibration side and driving side ensure even compaction.
Gentle start and stop avoids soil from clustering the machine;
Operation speed and impact frequency can be set via the speed knob so as to ensure each operation with same frequency and improve the compaction.
Service and maintenance
The engine hood is designed like two wings of bird: when the two wings are open, hydraulic pump is seen and accessible; maintenance and service locations are accessible when standing on ground; the hydraulic oil tank is 40L only, saving cost for users; the spray system is under the engine; it is easy to wash the nozzle and filter and drain off the water in cold winter.
Operating weight(kg) | 14000 |
Axle load,front(kg) | 7000 |
Static linear load, Front/Rear | 329/329 |
Working width | 2130 |
Minimum turning radius(mm) | 5838 |
Drum diameter(mm) | 1300 |
Vibration frequency ,high amplitude/low amplitude(Hz) | 51/67 |
Rated amplitude,high/low(mm)) | 0.8/0.3 |
Centrifugal force ,high/low | 170/112 |
Steering angle(°) | ±30 |
Oscillating angle(°) | ±7 |
Maximum climbing ability(%) | 30 |
Forward speed(km/h) | 0-6 |
0-8.5 | |
0-13 | |
Reverse speed(km/h) | 0-6 |
0-8.5 | |
0-13 | |
Engine model: | CUMNS QSB4.5 |
Rated power(kw) | 113 |
Rated speed(rpm) | 2200 |
Pad foot,number | - |
Height of the pad foot(mm) | - |
Overall length(mm) | 5208 |
Overall width(mm) | 2297 |
Overall height(mm) | 3060 |
Machine weight | 14000 |