Horizontal Injection Molding Machine With Hot Runner Injection Mould

Delivery Time:About 30 Days after receive down payment and sample bottles
Certification:CE,TUV,SGS,ISO

Horizontal Injection Molding Machine With Hot Runner Injection Mould

Specification

 A . Injection Unit

•A01)   Five Stage Injection Pressure

•A02)   Five Stage Injection Speed

•A03)   Programmable Holding Pressure profile

•A04)   Refilling in Stages

•A05)   Controller Inbuilt PID Temperature control

•A06)   Feed Zone Temperature indication

•A07)   Oil temperature indication

•A08)   Adjustable such back before and after refilling

•A09)   Auto sprue break

•A10)   Linear transducer to control programmable injection position

•A11)   Cold start screw prevention

•A12)   Sliding Mechanism for hopper

•A13)   Gas Nitrated hardened screw and Barrel

•A14)   Screw back pressure con troll with pressure relief valve

•A15)   Hand Operated Lubrication Unit

B. Clamping Unit

•B01)   Five Point twin toggle locking system

•B02)   Case Hardened toggle, Brackets and links with hardened

PIN & BUSH

•B03)   Motorized mould height adjustment for quick mould change

•B04)   Auto tonnage setting facility

•B05)   Low pressure precise mould protection with pressure and time setting

•B06)   Five stage Mould closing

•B07)   Five stage Mould opening

•B08)   Hydraulic cushioning for consistent mould opening position

•B09)   Linear transducer to control programmable clamp system

•B10)   Electrical and hydraulic (Dump value) interlock safety gate

•B11)   Moving platen with mechanical support with Teflon

•B12)   Hydraulic Ejector with Multi stroke

•B13)   Auto lubrication unit

C. Ejector

•C01)   Linear transducer to control programmable ejector position

•C02)   Multiple stroke ejection

•C03)   Ejector forward / backward speed adjustable

•C04)   Ejector forward / backward pressure adjustable

•C05)   Two stage in ejector forward/ backward operation

•C06)   Additional safety of sensing ejector backward position with

proximity switch

D. Hydraulic

•D01)   Compact and Simple design

•D02)   Sealing ring imported from Japan, a total four leak proof protection to

prevent the oil leakage.

•D03)   Proportional value for pressure and speed

•D04)   Variable displacement pump system attached with pulse absorber

•D05)   High magnetic closed-loop oil filter to effectively remove debris of the

oil, the filtration is up to 10um.

•D06)   Easy access to hydraulic elements for ease maintenance

E. Controller

•E01)   Display type LCD QVGA B/W of 5.7 “with 100 membrane keys

•E02)   Multi-CPU control, with 32 bit

•E03)   Precise temperature control, the precision is of ±1 degree

•E04)   Four forms of switch at the end of injection, they are time,

location, pressure, and speed.

•E05)   Breaker and air switch are imported from Japan, the brand of

Micro switch is Omron

•E06)   Instruction cycle time of controller in 0.4 microseconds

Technical parameters