Specifications
YC158 0603 10P8R 5%- Thick Film Chip Resistors Network
- High Stability
- High Reliability
- High Precession
YC158 0603 10P8R 5% - Thick Film Chip Resistors Network
| YC4P2R - ELECTRICAL CHARACTERISTICS | |
| STYLE | YC12 |
| Power Rating at 70 | 1/16W |
| Operating Temp. Range | -55 to +125(Derated to 0 Load at +125) |
| Maximum Working Voltage | 50V |
| Maximum Overload Voltage | 100V |
| Dielectric Withstand Voltage | 100V |
| Number of Resistors | 2 |
| Resistance Range | 10Ω ~ 1MΩ |
| Temperature Coefficient | -+200PPM/ |
| Resistance Tolerance | -+5% |
- Electrical properties of YC12 series:
- Power rating at 70 degrees Celsius: 1/16W
- Operating temperature: -55 to +125 degrees Celsius (derated to 0 load at +125 degrees Celsius)
- Maximum working voltage: 50V
- Maximum overload voltage: 100V
- Dielectric withstand voltage: 100V
- Number of resistors: two
- Resistance range: 10 to 1M ohms
- Temperature coefficient: +/-200ppm/degrees Celsius
- Resistance
- tolerance: +/-5%, +/-1%
- Environmental properties of YC12 series:
- Temperature coefficient: MIL-STD-202F, method 304,
- -55 to +125 degrees Celsius, +/- 200ppm/degrees Celsius
- Thermal shock: MIL-STD-202F, method 107, 5 cycles, -55
- to +125 degrees Celsius (step by step 2 minutes), +/- (1%+0.05 ohms)
- Low temperature operation: MIL-R-55342D, para.4.7.4,
- one hour at -65 degrees Celsius followed by 45 minutes RCWV, +/- (1%+ 0.05 ohm)
- Short time overload: MIL-R-55342D, para.4.7.5, 25 times RCWV for 5 seconds, +/- (2%+ 0.05 ohm)
- Insulation resistance: MIL-STD-202F, method 302, RCOV for 1 minute, >10G ohms
- Dielectric withstand voltage: MIL-STD-202F, method 301, R.M.S for 1 minute, by type
- Resistance to soldering heat: MIL-STD-202F, method 210C, soldered to test board at 260 degrees Celsius for 10 seconds, +/- (1% + 0.05 ohm)
- Moisture resistance: MIL-STD-202F, method 106F, 42 cycles
- Total 1000 hours, +/- (2% + 0.1 ohm)
- Life: MIL-STD-202F, method 108A, 1000 hours at 70 degrees Celsius RCWV intermittent, +/- (3%+ 0.1 ohm)
- Solderability: MIL-STD-202F, method 208G, 230 degrees Celsius for 5 seconds, >95% coverage
- Bending strength: JIS-C-5202, para.6.1.4, unit mounted in center of 90mm board length, deflected 1mm in either direction for 5 seconds,
- +/- (1%+ 0.05 ohm)
- Also available for YC16 and YC32 series:
- Power rating at 70 degrees Celsius: 1/16W and 1/8W
- Resistance tolerance: +/-5%
- Also available for YC15, YC17 and YC35 series:
- Power rating at 70 degrees Celsius: 1/32W, 1/32W and 1/16W
- Resistance tolerance: +/-5%
