Huawei WS320 WIFI Signal Amplifier

Specifications

Huawei WS320 WIFI Signal Amplifier

Home User:

The number of consumer electronic products which uses WiFi connectivity continues to grow, creating a natural demand for wider WiFi coverage around the home from devices which include games consoles, TV's, Printers, smartphones and many more devices. Domestic WiFi routers tend to be sited next to the landline master socket, typically in the hallway or at the one side of the house which is not always the most effective location for distributing signal throughout the building. The Huawei WS320 can be sited at any point in the home to provide a strong signal and minimise black spots.

Business User:

The Huawei WS320 provides an easy solution for business users to extend a WiFi network for employee or customer use at minimal cost; these can be used as a simple extension to an office network, help signal strength at restaurants, hotels, cafes and many other places of interest. The Huawei WS320 avoids the need for expensive cabling or additional routers.

Setting-up:

The WS320 can be set up easily in just a few steps:

Plug WS320 into a power socket 
Press the 'pairing' button (WPS) on the existing WiFi router 
Press the 'pairing' button on the Huawei WS320 
Wait a few seconds, the status light on the WS320 will turn green 
Huawei device will begin to relay the existing WiFi signal using the same network name

(SSID) and password (encryption) 
Devices can be seamlessly connected to the WiFi network as normal
 

WPS is supported by most recent Wifi routers (e.g. BT Home Hub), if WPS is not

available then a web-based setup administration console will guide the user through

steps required to configure the device.

Key Features:

Simple Plug in installation (UK 3-Pin Plug or EU 2-Pin Plug) 
WPS Pairing - Easy push button configuration 
Support for WEP, TKIP AES encryption 
Supports all common WiFi standards 
Up to 150m WiFi Range

Ieam specification:

The HUAWEI WS320 Wireless Repeater is a radio signal repeater that can work with

wireless access points (APs) to extend the wireless network coverage. Using the WS320

over a wireless network effectively helps solve radio signal issues, such as signal

impairment and attenuation.

1. Increases the range of existing wireless network
2. Easy integration or configuration via browser by WPS possible
3. Supports Wi-Fi 802.11 b / g / n
4. Small and flexible to use, simply plug into the socket
5. Transfer rate: up to 150 Mbit / s
6. Supports the following multiple authentication modes on the WLAN interface Open

system Wi-Fi Protected Access-pre-shared key (WPA-PSK) WPA2-PSK

More Pictures : 

Post Included:
1 x Huawei WS320 Wireless Repeater
1 x User Guide   

  12months