2016 hot sale 900/1800MHz Signal Booster GSM DCS Signal Booster for Mobile Phone Repeater 2g 3g
Packaging Details: thick box lined with foam for muti-band repeater
1 pc/ctn for repeater
Delivery Detail: within 20 days after all confirmed
Delivery Method: by air,land,sea or expression courier,such as DHL,Fedex,TNT,UPS,EMS etc.
2016 hot sale 900/1800MHz Signal Booster GSM DCS Signal Booster for Mobile Phone Repeater 2g 3g
2016 hot sale 900/1800MHz Signal Booster GSM DCS Signal Booster for Mobile Phone Repeater 2g 3g 2016 hot sale 900/1800MHz Signal Booster GSM DCS Signal Booster for Mobile Phone Repeater 2g 3g 2016 hot sale 900/1800MHz Signal Booster GSM DCS Signal Booster for Mobile Phone Repeater 2g 3g 2016 hot sale 900/1800MHz Signal Booster GSM DCS Signal Booster for Mobile Phone Repeater 2g 3g
2016 hot sale 900/1800MHz Signal Booster GSM DCS Signal Booster for Mobile Phone Repeater 2g 3g is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
GSM DCS Signal Booster Technical Specification
Items | Testing Condition | Specification | Meno | ||
Uplink | Downlink | ||||
Working Frequency(MHz) | Nominal Frequency | 890 – 915MHz | 935 - 960MHz | Full band or sub band | |
Bandwidth | Nominal Band | 0.2-25MHz | Can be configured in work band | ||
Gain(dB) | Nominal Output Power-5dB | 95±3 |
| ||
Output Power (dBm) | GSM modulating signal | 33 | 40 |
| |
ALC (dBm) | Input Signal add 20dB | Po≤±1 |
| ||
Noise Figure (dB) | Working in-band(Max. Gain) | ≤5 |
| ||
Ripple in-band (dB) | Nominal Output Power -5dB | ≤3 |
| ||
Frequency Tolerance (ppm) | Nominal Output Power | ≤0.05 |
| ||
Time Delay (us) | Working in-band | ≤5 |
| ||
Peak Phase Error(°) | Working in-band | ≤20 |
| ||
RMS Phase Error (°) | Working in-band | ≤5 |
| ||
Gain Adjustment Step (dB) | Nominal Output Power -5dB | 1dB |
| ||
Gain Adjustment Range(dB) | Nominal Output Power -5dB | ≥30 |
| ||
Gain Adjustable Linear(dB) | 10dB | Nominal Output Power -5dB | ±1.0 |
| |
20dB | Nominal Output Power -5dB | ±1.0 |
| ||
30dB | Nominal Output Power -5dB | ±1.5 |
| ||
Inter-modulation Attenuation (dBc) | Working in-band | ≤-45 |
| ||
Spurious Emission(dBm) | 9kHz-1GHz | BW:30KHz | ≤-36 | ≤-36 |
|
1GHz-12.75GHz | BW:30KHz | ≤-30 | ≤-30 |
| |
VSWR | BS/MS Port | 1.5 |
| ||
I/O Port | N-Female |
| |||
Impedance | 50ohm |
| |||
Operating Temperature | -25°C ~+55°C |
| |||
Relative Humidity | Max. 95% |
| |||
MTBF | Min. 100000 hours |
| |||
Power Supply | DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%) |
| |||
Remote Monitoring Function | Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power |
| |||
Remote Control Module | RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery | ||||
Items | Testing Condition | Specification | ||
Uplink | Downlink | |||
Working Frequency(MHz) | Nominal Frequency | 1710-1785MHz | 1805-1880MHz | |
Gain(dB) | Nominal Output Power-5dB | 95±3 | ||
Output Power (dBm) | GSM modulating signal | 33 | 40 | |
ALC (dBm) | Input Signal add 20dB | Po≤±1 | ||
Noise Figure (dB) | Working in-band(Max. Gain) | ≤5 | ||
Ripple in-band (dB) | Nominal Output Power -5dB | ≤3 | ||
Frequency Tolerance (ppm) | Nominal Output Power | ≤0.05 | ||
Time Delay (us) | Working in-band | ≤5 | ||
Peak Phase Error(°) | Working in-band | ≤20 | ||
RMS Phase Error (°) | Working in-band | ≤5 | ||
Gain Adjustment Step (dB) | Nominal Output Power -5dB | 1dB | ||
Gain Adjustment Range(dB) | Nominal Output Power -5dB | ≥30 | ||
Gain Adjustable Linear(dB) | 10dB | Nominal Output Power -5dB | ±1.0 | |
20dB | Nominal Output Power -5dB | ±1.0 | ||
30dB | Nominal Output Power -5dB | ±1.5 | ||
Inter-modulation Attenuation (dBc) | Working in-band | ≤-45 | ||
Spurious Emission(dBm) | 9kHz-1GHz | BW:30KHz | ≤-36 | ≤-36 |
1GHz-12.75GHz | BW:30KHz | ≤-30 | ≤-30 | |
VSWR | BS/MS Port | 1.5 | ||
I/O Port | N-Female | |||
Impedance | 50ohm | |||
Operating Temperature | -25°C ~+55°C | |||
Relative Humidity | Max. 95% | |||
MTBF | Min. 100000 hours | |||
Power Supply | DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%) | |||
Remote Monitoring Function | Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power | |||
Remote Control Module | RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery | |||
Items | Testing Condition | Specification | Meno | ||
Uplink | Downlink | ||||
Working Frequency(MHz) | Nominal Frequency | 1920 – 1980MHz | 2110 - 2170MHz | Full band or sub band | |
Bandwidth | Nominal Band | 5-25MHz | Can be configured in work band | ||
Gain(dB) | Nominal Output Power-5dB | 95±3 |
| ||
Output Power (dBm) | GSM modulating signal | 33 | 40 |
| |
ALC (dBm) | Input Signal add 20dB | Po≤±1 |
| ||
Noise Figure (dB) | Working in-band(Max. Gain) | ≤5 |
| ||
Ripple in-band (dB) | Nominal Output Power -5dB | ≤2.0 (3.84MHz) |
| ||
Time Delay (us) | Working in-band | ≤5 |
| ||
EVM(%) | Working in-band | ≤12.5 |
| ||
PCDE (dB) | Working in-band | ≤35 |
| ||
ACLR(dBc) | ±5MHz | Working in-band | ≥-45 |
| |
±10MHz | Working in-band | ≥-50 |
| ||
Gain Adjustment Step (dB) | Nominal Output Power -5dB | 1dB |
| ||
Gain Adjustment Range(dB) | Nominal Output Power -5dB | ≥30 |
| ||
Gain Adjustable Linear(dB) | 10dB | Nominal Output Power -5dB | ±1.0 |
| |
20dB | Nominal Output Power -5dB | ±1.0 |
| ||
30dB | Nominal Output Power -5dB | ±1.5 |
| ||
Spurious Emission(dBm) | 9kHz-1GHz | BW:30KHz | ≤-36 | ≤-36 |
|
1GHz-12.75GHz | BW:30KHz | ≤-30 | ≤-30 |
| |
VSWR | BS/MS Port | 1.5 |
| ||
I/O Port | N-Female |
| |||
Impedance | 50ohm |
| |||
Operating Temperature | -25°C ~+55°C |
| |||
Relative Humidity | Max. 95% |
| |||
MTBF | Min. 100000 hours |
| |||
Power Supply | DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%) |
| |||
Remote Monitoring Function | Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power |
| |||
Remote Control Module | RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery | ||||
Installation Diagram
Main Features
1. High linearity PA; High system gain;
2. Intelligent ALC technology;
3.Full duplex and high isolation from uplink to downlink;
4. Automatic Operation convenient operation;
5. Integrated technique with reliable performance;
6. Bandwidth can be configured from 0.2-25MHz in work band.
7.Local and remote monitoring (optional) with automatic fault alarm &remote control;
8. Weatherproof design for all weather installation;
Applications
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at strong enough level as the Rx Level in repeater site should be more than -70dBm;
And can meet the requirement of antenna isolation to avoid self-oscillation.
At present,Kingtone exhibited the highest quality products and enterprise's comprehensive strength,and Kingtone continues to strengthen technological innovation on repeater products and will launch the new products on the market soon.With your supports and new requirements which can make us improve our service,innovative our technology and consummate the products.
OEM & ODM are welcome!
Product range:GSM/CDMA/DCS/WCDMA/TETRA/LTE Wireless Full Band Repeater,Fiber Optic Repeater,Frequency Shifting Repeater,Digital/Analog Repeater,Trunk Amplifier etc.
Support System | Frequency Range | Output Power |
GSM900MHZ | 890-915MHz/935-960MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
DCS1800MHz | 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
PCS1900MHz | 1895-1910MHz/1975-1990MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA450MHz | 450-457.5MHz/460-467.5MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA800MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA1900MHz | 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS2100MHz | 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM900/1800MHZ | 890-915MHz/935-960MHz 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/ |
GSM850/1900MHZ | 824-849MHz/869-894MHz 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W |
GSM900/UMTS2100 | 890-915MHz/935-960MHz 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/ |
Our present manufacturing service:
1. Single-band repeaters of LTE/GSM/CDMA/PCS/DCS/WCDMA
2. Dual-band repeater of GSM/DCS; GSM/WCDMA; CDMA/PCS;
3. Tri-band repeater of GSM/DCS/WCDMA
4,Trunk Amplifier
5. All kind of Antenna/Splitter/Connector/Cable
2016 hot sale 900/1800MHz Signal Booster GSM DCS Signal Booster for Mobile Phone Repeater 2g 3g
Guarantee:
All the Items have twice test before packaging
30 Days Customer Satisfaction
Return Policy:
If for any reasons you are not satisfied with the products within 30 days, please contact us and we will advise return detail and arrange a full refund. Buyer is responsible for return shipping costs.
Feedback Policy:
Please leave us a positive feedback if you satisfy with our total services as well as the products, We will provide the priority of the after-sales service.
Warranty:
Three Months Free Replacement
12months Manufacturer Warranty
To know more 2016 hot sale 900/1800MHz Signal Booster GSM DCS Signal Booster for Mobile Phone Repeater 2g 3g, pls kindly visit our website : www.kingtone.net.cc; www.cnkingtone.com
| Contact Person | Amy Su |
| Tel | +86 595 228857992 |
| Fax | +86 595 22155502 |
| +86 18959901933 | |
| Skype | amysu217226 |
| Web | www.cnkingtone.com ; www.kingtone.cc |
| Add | Bld B,Yucheng Base,Keji Road,Fengze High-Tech Park,Quanzhou,Fujian,China |
| Kingtone, | Connecting the world seamlessly! |
Key Words: 2016 hot sale 900/1800MHz Signal Booster GSM DCS Signal Booster for Mobile Phone Repeater 2g 3g