2g 3g Dual Band cell phone signal receiver 900 2100 Repeater
Description:
RF Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS).
GSM/WCDMA Signal Repeater are very effective equipment that can offset the covering shortage of the base station of the mobile network, expand the cover range of the base station and fill the signal blind zone to ensure the convenient and pleasant communication.
2g 3g Dual Band cell phone signal receiver 900 2100 Repeater Features:
l High linearity PA; High system gain;
l Intelligent ALC technology;
l Full duplex and high isolation from uplink to downlink;
l Automatic Operation convenient operation;
l Integrated technique with reliable performance;
l Local and remote monitoring (optional) with automatic fault alarm &remote control;
Weatherproof design for all-weather installation;
2g 3g Dual Band cell phone signal receiver 900 2100 Repeater Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
The coverage of sites including Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining Districts, Villages etc.
2g 3g Dual Band cell phone signal receiver 900 2100 Repeater Technical Specification:
Items | Testing Condition | Technical Specification | |||
Uplink | Downlink | ||||
Working Width(MHz) | Nominal Frequency | GSM:890~915MHz WCDMA:1920~1980MHz; (Customized) | GSM:935~960MHz;WCDMA:2110~2170MHz; (Customized) | ||
Gain(dB) | Nominal Output Power -5dB | ≥95(Customized) | |||
Output Power (dBm) | GSM/WCDMA modulating signal | 37 | 43 | ||
ALC (dBm) | Input Signal add 20dB | Po≤±1 | |||
Noise Figure (dB) | Working in-band(Max.Gain) | ≤5 | |||
Ripple in Band (dB) | Nominal Output Power -5dB | ≤3 | |||
Frequency Tolerance (ppm) | Nominal Output Power | ≤0.05 | |||
Transmissions Delay (us) | Working In-band | ≤5 | |||
Peak Phase Error(°) | Working In-band | ≤20 | |||
RMS Phase Error (°) | Working In-band | ≤5 | |||
Gain Adjustable Range(dB) | Nominal Output Power -5dB | ≥30 | ≥30 | ||
Gain Adjustable Linear(dB) | 10dB | Nominal Output Power -5dB | ±1.0 | ±1.0 | |
20dB | Nominal Output Power -5dB | ±1.0 | ±1.0 | ||
30dB | Nominal Output Power -5dB | ±1.5 | ±1.5 | ||
Intermodulation Attenuation(dBc) GSM | Working In-band | ≤-45 | ≤-45 | ||
ACPR(WCDMA) | Working In-band | 5M | ≤-45 | ≤-45 | |
10M | ≤-50 | ≤-50 | |||
Spurious Emission (dBm) | 9kHz-1GHz | BW:30KHz | ≤-36 | ≤-36 | |
1GHz-12.75GHz | BW:30KHz | ≤-30 | ≤-30 | ||
VSWR | BS Port | 1.5 | |||
MS Port | 1.5 | ||||
900/2100dual band gsm repeater for In-Building Coverage
Frequency range list for our repeaters :
Support System | Frequency Range | Output Power |
GSM900MHZ | 890-915MHz/935-960MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
DCS1800MHz | 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
PCS1900MHz | 1895-1910MHz/1975-1990MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA450MHz | 450-457.5MHz/460-467.5MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA800MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA1900MHz | 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS2100MHz | 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM900/1800MHZ | 890-915MHz/935-960MHz 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/ |
GSM850/1900MHZ | 824-849MHz/869-894MHz 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W |
GSM900/UMTS2100 | 890-915MHz/935-960MHz 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/ |
Our repeater support above frequency range .
Our present manufacturing service:
1. Single-band repeaters of LTE/GSM/CDMA/PCS/DCS/WCDMA
2. Dual-band repeater of GSM/DCS; GSM/WCDMA; CDMA/PCS;
3. Tri-band repeater of GSM/DCS/WCDMA
4,Trunk Amplifier
5. All kind of Antenna/Splitter/Connector/Cable
Question: I work in an office building where my cell phone coverage in certain areas, including my office, is non-existent or spotty at best. How can I improve my coverage?
Answer: The requirement for reliable, always-on cell phone coverage within the office environment is increasing dramatically. It is not unusual to encounter trouble spots within a building where cell phone signals are weak or non-existent.
Kingtone repeater provides affordable and clear coverage to those trouble spots. The unit can be easily deployed and provides a coverage range of up to 100,000 square feet. Multiple units can be easily deployed to cover office areas and working locations.
Kingtone repeater can be deployed even without access to the roof or outside.
Welcome to Our Website for more information : www.kingtone.cc