Specifications
2Watt 2.4G Wifi Repeater1)IEEE 802.11b/g/n
2)frequency:2400-2483.5mhz
3)Certificate:CE&RoHs
4)warranty: 2years
wifi booster 802.11 Wireless 2Watt 2.4GHz Wifi amplifier Access Point indoor wifi Repeater
Product Features:
1.IEEE 802.11b/g/n compatible
2.High receiving sensitivity and high transmitting power(2W)
3.Increase your wireless coverage and throughput
4.Works with Most Wireless Access Point/Routers or Wireless Network Card
5.Easy to install and use
6.Ideal for use detachable 2.4GHz antenna equipments
Package Contents:
Open the box carefully,check the following articles:
Parts | Quantity | Description |
Wi-Fi Booster | 1× | RF610 Pro |
Antenna | 1× | 6 dBi Dipole Antenna |
Power supply Adapter | 1× | 9V DC 1000mA |
Shielded cable | 1× |
|
User manual | 1× |
|
Color Box | 1× |
|
Operating frequency | 2400-2483.5MHz |
Operating mode | TDD |
Signal standard | IEEE 802.11b/g/n |
Minimum input power | 3dBm |
Maximum input power | 20dBm |
Maximum output power | 33dBm (2w) |
Uplink gain | 16dB |
Downlink gain | 12dB |
Noise figure | lower 2.5dB |
Delay | <1uS |
Operating temperature | -20°C to + 55°C |
Weight | 129g |
AP/Router Interface | SMA Female |
Antenna Interface | RP-SMA Male |
Installation Guide
Step 1:Connect Antenna to the Wi-Fi Booster.
CAUTION: The Booster antenna interface canonly connect antenna, Don’t connectto any other wireless products in any case, otherwise it will result in equipment malfunction or damage.
Step 2:Connect Wireless AP/Router or Wireless Network Card to the Wi-Fi Booster.
Tips: Users can also use other shielded cables to connect, but the cable length should be as short as possible, preferably not exceeding 3m.
Step 3:Power up the Wi-Fi Booster.
At first, the color of the LED is green. When the data is being transmitted, the light will turn red.The more dense data transmission, the faster color change of the LED.
Step 4:Adjust the Antenna position and angle,make the Wi-Fi Booster receive the best signal
Tips: You can use third-party software such as Network Stumbler or WirelessMon to detect the signal of Wireless AP/Router / Wireless Network Card, and adjust the antenna angle to achieve the strongest signal.
Attentions:
1.Keep at least 1m distance between Wi-FiBooster antenna and any other 2.4G wireless products,Otherwise may result in equipment malfunction or damage.
2.This type of Wi-Fi Booster is not waterproof, please do not put it in the humid environment.
3.Do not use it where the place surrounded by a large number of metals.which will make the electromagnetic signal blocked.
4.If the user install antenna in the high location, you need to take protection measures for lightning.
5.After the Wi-Fi Booster is turned on, can not remove the Antenna, otherwise may damage the Wi-Fi Booster.
