General Description
ADSL loop extender can extend the coverage of ADSL lines. It will provide systems with higher performance-to-cost ratio, improve the equipment utilization rate and optimize the network. This product will allow you to double the number of subscribers that you can reach while offering more consistent high bandwidth services to your existing customers.
ADSL loop extender is an active element installed in the outside loop plant. It operates as an amplifier and equalizes the signal.
ADSL loop extender’ box and the business card are as below:
- AER800-1P box: One box for 1 AER800-1P embedded.
- AER800-2P box: One box for 1 AER800-2P embedded.
- AER800-4P box: One box for 4 AER800-C1P and 1 AER800-PWR embedded.
- AER800-8P box: One box for 8 AER800-C1P and 1 AER800-PWR embedded.
- AER800-C1P: One port ADSL loop extender for one ADSL subscriber, can be inserted into the extender’s box easily.
- AER800-PWR: One port power supply, which can power for 1~8 AER800-C1P cards, can be inserted into the extender’s box easily.
Benefits
- ADSL subscriber can be added by inserting the business cards AER800-C1P.
- Economize the copper pairs for one additional pair can power eight ADSL subscriber.
- Comprehensive over-voltage protection.
- Easy to install, deploy and maintain.
- Low power consumption and more environmentally friendly
Technical Specifications
Operating Environment | Temperature | -35°C~+65°C | |
Relative Humidity | 5%~95% (Non-condensing) | ||
Input Power | DC60V ~ DC155V | ||
Power Consumption | Less than 0.2W( per port ) | ||
Dimensions(LWH) | AER800-1P box | 160mm×70mm×48mm | |
AER800-2P box | 192mm×92mm×42mm | ||
AER800-4P box | 215mm×290mm×82mm | ||
AER800-8P box | 315mm×290mm×82mm | ||
Number of Supported Subscriber | AER800-1P | 1 ADSL subscriber | |
AER800-2P | 2 ADSL subscriber | ||
AER800-4P | 4 ADSL subscriber | ||
AER800-8P | 8 ADSL subscriber |
Technical specifications of AEC-B1P/B4P/RACK
Operating Environment | Temperature | -10°C~ +50°C |
Relative Humidity | 5% ~95% (Non-condensing) | |
Input Voltage | AEC-B1P | AC 220/110V(85V~265V) DC48V(36V~72V) |
AEC-B4P | DC48V(36V~72V) | |
AEC-RACK | DC48V(36V~72V) | |
Output Voltage | DC 116V | |
Output Current | Less than 20mA(8 ports fully loaded) | |
Output Port | AEC-B1P | 1 port |
AEC-B4P | 4 ports | |
AEC-RACK | 2×13 ports(max) | |
Support the Extender Model and Quantity | AEC-B1P | one AER800-1P or one AER800-2P or one AER800-4P or one AER800-8P |
AEC-B4P | four AER800-1P or four AER800-2P or four AER800-4P or four AER800-8P | |
AEC-RACK | twenty six AER800-1P or twenty six AER800-2P or twenty six AER800-4P or twenty six AER800-8P | |
Dimensions(LWH) | AEC-B1P | 110 mm×50 mm×30 mm |
AEC-B4P | 480 mm×160 mm×44 mm | |
AEC-RACK | 480 mm×153 mm×133 mm |
L1: The signal twist pair connecting ADSL loop extender to DSLAM.
L2: The signal twist pair connecting ADSL loop extender to modem.
L3: The power twist pair connecting AEC to ADSL loop extender.
Resistance and Distance Demand
The recommended installation conditions are as follows:
(1)26 AWG twist pair
The demand about resistance and distance:
Route | 20°Cloop resistance (Ω) | Distance Demand | |
Kft | Km | ||
L1 | 444 ~ 1332 | 4.9 ~ 14.8 | 1.5 ~ 4.5 |
L2 | 88 ~ 1184 | 1.0 ~ 13.2 | 0.3 ~ 4.0 |
L(L1+L2) | 680 ~ 1776 | 7.5 ~ 19.7 | 2.3 ~ 6.0 |
(2)24 AWG twist pair
The demand about resistance and distance:
Route | 20°CLoop Resistance (Ω) | Distance Demand | |
Kft | Km | ||
L1 | 344~1032 | 6.6~19.7 | 2.0~6.0 |
L2 | 86~929 | 1.6~17.7 | 0.5~5.4 |
L(L1+L2) | 568~1445 | 10.8~27.7 | 3.3~8.4 |
AEC-B1P
AER800-2P
AER800-4P
AER800-8P
Product Category
Production & Testing
Raw Materials & Finished Products Warehouse
FAQ
1. How can I contact you?
Here is our contact information:
2. Can you do OEM for us?
Yes. If there is a certain order quantity, we can do OEM including printing, logo, customized model for you.
3. How can I place an order?
(1) Agreement is achieved on the product price and product specifications.
(2) We make proforma invoice for your confirmation.
(3) When you agree on the proforma invoice, you make the payment.
(4) We deliver the goods after we receive your payment.
4. What are your terms of payment?
Usually, we can accept T/T, Paypal and Western Union. You can select the terms of payment which is more convenient for you.
5. What about the lead time?
Usually, if there is stock of goods, we will deliver the goods within 3~5 work days after we receive the payment.
6. How about the shipping?
Usually, we will deliver the goods via International Express like Fedex, DHL, TNT, UPS and so on. Door to door delivery service will be provided.
7. What are the advantages of your products?
A. Good quality and competitive prices.
B. Strict quality control during production process.
C. Professional operations in processes of production, sales, assembling, packaging and shipping.
D. Good aftersale service. Professional online technical support can be provided. Moreover, if there is any problem of the goods, we will help to solve the problem or provide replacement of the goods.