Automatic render machine for polish plaster with local plasterers
This machine is a ideal equipment for residential buildings, office buildings, houses indoor wall surface hardening plaster. Cement Plastering Machine
Application (wall): Cement wall , brick wall, concrete wall: hollow wall, brick wall, unburned brick wall.
Application(ash): white ash, ash powder, cement powder, foam mortar, dry mortar, gypsum etc.
Which can be used in plastering(thickness below 3cm), wall(height below 5m ). Cement Plastering Machine
Parameters
Cement Plastering Machine
Model | LYD-CY-3 | Efficiency | 500 m ²/8h |
thickness | 2mm—30mm | Size | 1300×850×540mm |
Height | Below 5m | Voltage | 220V / 380V |
Weight | 180kg | HS Code | 8474.31.0000 |
Safety Protection Design
- Patter hasn’t changed to plaster angle,click start switch machine but does not start, avoid scratch board Cement Plastering Machine
- Startup if motor reversal, the machine will automatically cut off power supply, in order to protect the steel wire rope not disc . Cement Plastering Machine
- Machine down stuck will automatically cut off power supply, in order to protect the steel wire rope not disc. Cement Plastering Machine
- Wire rope exposed, found that the coarse will change in time, if the steel wire rope broken, the machine with abnormal decline in 20 cm will be stuck Cement Plastering Machine
- All the activities of the joint, fastening screws through antirust processing, all bearing sealing treatment, all accessories from the best of the domestic enterprises.To create the most suitable and highest efficiency, best quality, the world's most advanced machinery. Cement Plastering Machine
- Ahead of the heavy machine design, even if the hydraulic oil loose also won't back down.
1.Whether the machine could be used for the external wall and ceiling?
No,it couldn't at present.
2.How about the finishing effect?Whether it is smooth?
The finishing effect is definitely smooth,no hollow,no cracking.
3.How many people to operate the machine effectively?
Normally 3 people are enough to operate the machine,two people to operate the machine and one person is in charge of small area repairing.
4.How do we use the machine on the walls with openings such as window and doors?Can it be done with the machine or do we have to do it manually?
All models of machines can definitely render the area which is below and above window.
Supply little mortar at first,when the machine reach the open area,the mortar is nearly used up.After the machine passed the open area,press the "STOP" button and supply the mortar to render the top area then.
5.How is the machine cleaned after use?
After finish using the rendering machine,the cleaning job needed to be done after the power is cut off.Use water to wash the caster,plastering tank,directional pipes,extension.The machine body and the button could only be cleaned by cloth.
Send your inquiry details in the below,Click "send" now!