Installation
1. Disconnect power.
2. Connect terminals as shown in the wiring diagram below.
3. Select desired delay on break period.
4. Reapply power, check operation.
Specification
Input:
Line Voltage: 18-30 VAC
Line Frequency: 50/60 HZ
Output Output Ratings:
Maximum: 1 amp
Minimum: 20 mA
Inrush: 10 amps
Time Delays (Adjustable Only)
OFF delay: 12-390 seconds
Mode of Operation
Power must be applied before and during the time delay period. When the initiate contact closes, the load energizes and remains
energized as long as the initiate contact is closed. The time delay begins when the initiate contact opens. At the end of the time
delay period, the load is turned off. If the initiate contact recloses during the time delay period, the load remains energized
and the time delay is reset to zero. Removal of the input power during the delay turns off the load and resets the time delay to
zero. A one-second interrogation delay is provided to avoid nuisance trips due to thermostat bounce or tampering
