Specifications
1. Fast delivery2. Over 10 years experience
3. Safe operation
4. Easy to install
5. Long functional life
Parameters | S20D-II | |
Heat transfer area of plate m2 | 0.85 | |
Chevron depth mm | 4 | |
Chevron angle º | 1 | 60 |
2 | 120 | |
Chevron normal pitch mm | 15 | |
Equivalent diameter mm | 8 | |
Hole diameter mm | 200 | |
Center Distance of holes mm | H | 1478 |
W | 341 | |
Center distance of suspension mm | 1810 | |
Cross section ofsingle passage mm2 | 2184 | |
Overall dimension of plate mm | L | 1746 |
W | 609 | |
The max. heat transfer coefficient (water to water)W/ m2.ºC | 7500 | |
The max. Working temp.ºC | 180 | |
The max. testing pressure Mpa | 2.5 | |
The max. flow rate M3/h | 565 | |
We are a leading specialist in the area of the development and manufacturing of heat exchangers at world-wide standards.
The heat exchangers with up to 1500 m2 exchange surface are supplied for all usual industrial applications as well as for the ranges heating, climate, ventilation, food production, pharmaceutical.
Consistent development in the field of sealed plated heat exchangers has resulted in a wide variety of plate version with respect to surface structure, material and gaskets for various media on heat exchange.
The high performance plates provide the optimum heat exchanger for every thermal problem.
High head transfer coefficients and thus best possible utilization of the surface guarantee a compact, low cost solution to the problem.
Plate heat exchanger offer additional flexibility by changing the number of plates, the heat exchanger can also be adapted to other thermal operating conditions.
Computer programs determine the optimum heat exchanger for your operation conditions based on latest technology.
We provide domestic and foreign customers with wild range of plate heat exchanger in high quality and competitive low price.
Each plate is provided with a gasket, which seals the flow gaps to atmosphere and the media from one another. The plate package is mounted in a rack consisting of a fixed number of plates. Two pressure plates clamp this package together with tie rods. Single pass and multi-pass arrangements are standard with a surface area of up 1500m2 in one unit. Pure counter flow is employed to achieve maximum possible heat transfer.
1. Plate material
Stainless steel suitable for clean water, river water, edible oil, and mineral oil
Titanium and titanium palladium suitable for sea water, salt water, salt.
Hastelloy suitable for sulfuric acid, hydrochloric acid, phosphoric acid
2. Design and Selection
The plate heat exchanger produced by our company strictly follows the rule listed in GB16409-1996 "plate heat exchanger".
3. Overview
Plate heat exchanger is compact and efficient heat exchange equipment,using the metal corrugated sheet as the major heat transfer agent. The fluid flows through the inner-flow mesh panel which is made up by the corrugated plates. Because after the plates assembly, they form a special channel which can generate turbulence under low Reynolds number, and the turbulence can easily destroy the fluid boundary layer,that greatly reduces thermal resistance and efficiently enhances the heat transfer, moreover, with no scale.
