Specifications
1. Low permanent linear change on reheating2. High dense structure
3. Good Thermal Shock Stability.
4. Easy to be machined
MD Mold Bricks characterize as follows:
1. Low permanent linear change on reheating
Firing under the temperature of 1050 Degree. Ensures no distortion and no permanent linear change on the mold bricks.
2.High dense structure
MD Mold Brick is manufactured from micron grade material, which is pressed molding following being mixed by high speed blender. The maximum rodis 1000 with extremely fine section structure.
3. Good Thermal Shock Stability.
No cracks even chap would be happening after long service of the bricks
4.Easy to be machined
Physical and chemical index
Item | Behaviors | |
TY-MD | ||
Typical Chemical Composition % | Al2O3 | ≥25 |
Fe2O3 | ≤1.5 | |
Cold Crushing Strength Mpa | ≥10 | |
Cold Bending Strength Mpa | ≥1.5 | |
Permanent Linear Change(%) 1000°CX24h | ≤0.5 | |
Thermal conductivity 350±10°C(W/m.k) | ≤0.35 | |
Bulk Density(g/cm3) | ≥1.0 | |
Grain Size (mesh) | ≤200 | |
MD Product Dimension List
No. | L(mm) | W(mm) | H(mm) |
1 | 450 | 250 | 25-120 |
2 | 450 | 320 | 25-120 |
3 | 300 | 300 | 25-120 |
4 | 380 | 300 | 25-120 |
5 | 510 | 270 | 25-120 |
6 | 510 | 510 | 25-120 |
7 | 440 | 360 | 25-120 |
8 | 600 | 480 | 25-120 |
9 | 500 | 380 | 25-120 |
MD mold bricks could also be used in thermal bending glass, thermal melting glass and art glass. We sincerely welcome the comments from all our customers.
The Mold Brick is manufactured based on the customer request, which avoids waste from cutting of the big blocks.
We have established good fame among our customers since our mold brick line was put into production with some performances superior to similar products available in the market.
