Boscam fpv kit sky-N500 + D58-2
500mw fpv transmitter +2 channels diversity receiver
D58-2 DUO5800 5.8Ghz 32CH Wireless AV FPV Diversity Receiver
Product Description
Specification of D58-2 FPV receiver:
- Video Output: 75Ω/1Vp-p
- Audio Output: 10KΩ/500mVp-p
- TV System: PAL/NTSC/SECAM
- Input Voltage: 12V/500mA
- Antenna connection:SMA
- Input voltage range: 12V (3S lipo)
- Dimensions: 76x64x18mm
- Weight: 90g
Features of D58-2 FPV receiver:
- Twin fpv Receiver for best reception
- Automatic Antenna Switching
- Triple, buffered AV outputs
- Can receive 2 different channels at the same time
- Not affect by 2.4GHz R/C Radios
- AV Receiver with Diversity inputs
- Small, light weight,durable,anodized aluminum case
Package Included:
- D58-2 Dual Diversity Receiver*1
- Power Cable*1
- AV Cable*2
- Antenna*2
SKY-N500 500mw 32ch FPV Transmitter with display
Product Overviews
Product Instruction of fpv transmitter:
The SKY-N500 fpv Transmitter packs a whopping 500mW of ultra clean 5.8GHz power! A must for those looking for longer range and locked in video. The SKY-N500 fpv transmitter can transmit a full range of 32 channels and comes with a clean pre-wired harness, it’s perfect for any long range aircraft!
The SKY-N500 fpv transmitter boasts an impressive new feature, the transmitting band and channel can be changed remotely by the user with a 3 position switch on their radio. This means you can quickly change to a clear band and frequency should you encounter interference on your existing channel.
Features of fpv transmitter:
l) 128*64 super bright color digital display with High Brightness & Contrast ,clearly visible under the sun
2) Channel and Frequency clearly visible on screen
3) Output power 500mw, distance no less than 1Km with 2dbi Omni directional antenna
4) Support 2-6S battery and low battery alarm
5) Battery Voltage display
6) Screen Display: Current/Temperature/PA Power detection
Each unit SKY-N500 fpv transmitter will come with the "User Manual",tell you the "Opetration Guide":
1)Channel/Frequency Setup;
2)Low Battery Warn Setup;
3)Turn on/off Beep
Precautions:
1.Please never power the fpv transmitter without the antenna to avoid damage.
2.Please make sure the power source +/- is the same as the transmitter to avoid damage.
3.It's suggested to connect external power supply if there is twill interference with the power output from the fpv transmitter to the poor compatibility cameras or other equipments.
4.The 5V 100mA Output on the fpv transmitter can power the remote control receiver.While please don't connect equipment with more than 5V as it may damage the fpv transmitter.
Frequency table:
| A | B | C | D | |
| 1 | 5705 | 5733 | 5865 | 5740 |
| 2 | 5685 | 5752 | 5845 | 5760 |
| 3 | 5665 | 5771 | 5825 | 5780 |
| 4 | 5645 | 5790 | 5805 | 5800 |
| 5 | 5885 | 5809 | 5785 | 5820 |
| 6 | 5905 | 5828 | 5765 | 5840 |
| 7 | 5925 | 5847 | 5745 | 5860 |
| 8 | 5945 | 5866 | 5725 | 5880 |
Packaging
Package Detail:
- 1 x fpv transmitter (TX)
- 1 x TX antenna (2db)
- 1 x signal wire with servo type connector
- 2 x video input wires
Product Show:
Product Show:
Our Services
Company Information
FAQ