Ground Spur Pinion Shafts ,Gear Shafts
1.Specification
Specifications | |||
Precision grade | JIS B 1702-1 grade N7 (*1) | Tooth Surface hardness | HRC50 - 60 |
Gear teeth | Standard full depth | Surface treatment | Black oxide except ground surface |
Pressure angle | 20° | Surface finish | Ground |
Material | S45C | Datum reference surface for teeth grinding | Shafts(ground position) |
Heat treatment | Normalizing, tooth surfaces induction hardened | Modifications | Possible |
2.For shape of gear
| Catalog No. | Module | No. of teeth | Profile shift | Shape | Shaft dia. (L) | Shaft length (L) | Pitch dia. | Outside dia. | Face width | Shaft dia. (R) | Shaft length (R) | Total length | Allowable torque(kgf·m) | Allowable torque(kgf·m) | Backlash low | Backlash up | Weight |
| coefficient | A' | F' | C | D | E | A | F | G | Bending strength | Surface durability | (mm) | (mm) | (kg) | ||||
| TSGS1.5-10 | 1.5 | 10 | 0.5 | S7 | 12.2 | 25 | 15 | 19.35 | 15 | 12.2 | 100 | 140 | 1.3 | 0.38 | 0.08 | 0.16 | 0.14 |
| TSGS1.5-11 | 1.5 | 11 | 0.5 | S7 | 13.7 | 25 | 16.5 | 20.85 | 15 | 13.7 | 100 | 140 | 1.48 | 0.47 | 0.08 | 0.16 | 0.17 |
| TSGS1.5-12 | 1.5 | 12 | 0 | S7 | 13.7 | 25 | 18 | 21 | 15 | 13.7 | 100 | 140 | 1.02 | 0.48 | 0.08 | 0.16 | 0.17 |
| TSGS1.5-13 | 1.5 | 13 | 0 | S7 | 15.2 | 25 | 19.5 | 22.5 | 15 | 15.2 | 100 | 140 | 1.23 | 0.56 | 0.08 | 0.16 | 0.21 |
| TSGS2-10 | 2 | 10 | 0.5 | S7 | 16.2 | 30 | 20 | 25.8 | 20 | 16.2 | 120 | 170 | 3.08 | 0.93 | 0.11 | 0.21 | 0.3 |
| TSGS2-11 | 2 | 11 | 0.5 | S7 | 18.2 | 30 | 22 | 27.8 | 20 | 18.2 | 120 | 170 | 3.5 | 1.12 | 0.11 | 0.21 | 0.38 |
| TSGS2-12 | 2 | 12 | 0 | S7 | 18.2 | 30 | 24 | 28 | 20 | 18.2 | 120 | 170 | 2.41 | 1.15 | 0.11 | 0.21 | 0.38 |
| TSGS2-13 | 2 | 13 | 0 | S7 | 20.2 | 30 | 26 | 30 | 20 | 20.2 | 120 | 170 | 2.92 | 1.35 | 0.11 | 0.21 | 0.46 |
| TSGS2.5-10 | 2.5 | 10 | 0.5 | S7 | 20.2 | 35 | 25 | 32.25 | 25 | 20.2 | 135 | 195 | 6.01 | 1.83 | 0.11 | 0.21 | 0.54 |
| TSGS2.5-11 | 2.5 | 11 | 0.5 | S7 | 22.7 | 35 | 27.5 | 34.75 | 25 | 22.7 | 135 | 195 | 6.84 | 2.24 | 0.11 | 0.21 | 0.68 |
| TSGS2.5-12 | 2.5 | 12 | 0 | S7 | 22.7 | 35 | 30 | 35 | 25 | 22.7 | 135 | 195 | 4.71 | 2.28 | 0.11 | 0.21 | 0.68 |
| TSGS2.5-13 | 2.5 | 13 | 0 | S7 | 25.2 | 35 | 32.5 | 37.5 | 25 | 25.2 | 135 | 195 | 4.75 | 2.23 | 0.11 | 0.21 | 0.83 |
| TSGS3-10 | 3 | 10 | 0.5 | S7 | 24.2 | 40 | 30 | 38.7 | 30 | 24.2 | 150 | 220 | 10.4 | 3.19 | 0.11 | 0.21 | 0.89 |
| TSGS3-11 | 3 | 11 | 0.5 | S7 | 27.2 | 40 | 33 | 41.7 | 30 | 27.2 | 150 | 220 | 9.85 | 3.26 | 0.11 | 0.21 | 1.11 |
| TSGS3-12 | 3 | 12 | 0 | S7 | 27.2 | 40 | 36 | 42 | 30 | 27.2 | 150 | 220 | 6.78 | 3.32 | 0.11 | 0.21 | 1.11 |
| TSGS3-13 | 3 | 13 | 0 | S7 | 30.2 | 40 | 39 | 45 | 30 | 30.2 | 150 | 220 | 8.2 | 3.91 | 0.11 | 0.21 | 1.35 |