Product Description
The new radial piston pump RKP is equipped with a new closed-loop proportional valve with embedded electronics. This new closed-loop piston pump can adjust, adjust and troubleshoot flow and pressure. The new RKP of the radial piston pump can be digitally controlled through the CANopen interface, or it can be operated as a pure analog device under the control of analog command signals. This gives it maximum flexibility and is compatible with multiple PLC structures.
Characteristic
-Seven sizes from 19 to 140 cm / rev (1.2 to 8.5 in / Rev)
-Multiple control options
-Axial mounted multi pump configuration
-Suitable for various hydraulic fluids
-Standard pressure series 280bar (4.000p5) and high pressure series suitable for mineral oil
- 350bar(5,000psi)
-Fast response time
-Simple design
-Good suction characteristics
-Low pressure fluctuation
- low noise.
Technical Parameters
Displacement(cm/rev] | 19 | 32 | 45 | 63 | 80 | 100 | 140 | ||||||
weight[kg](Ib) | 28(62) | 38 (84) | 38(84) | 65(143) | 65(143) | 71 (156) | 109 (240) | ||||||
Moment of inertia[kg cm2] | 17.7 (6.05) | 61.0(20.8) | 61.0(20.8) | 186.3 (63.7) | 186.3(63.7) | 186.3(63.7) | 380.0(130.0) | ||||||
Pipe connection standard specifications“S" SAE 3000psi | 3/4" | 1" | 1* | 1 1/4" | 1 14" | 1 1/2 " (Suction tube) 1 1/4 "(pressure) SAE 6000psi | 2 12 " (Suction tube) 1 1/2 "(pressure) SAE 6000 psi | ||||||
Recommended outer diameter as discharge pipe (Lightweight specifications) [mm] (in) | 15(5/8") | 18 (3/4) | 18(3/4") | 22(7/8) | 22(7/8*) | 22(7/8*) | 22(7/8*) | ||||||
Flow rate at absolute inlet pressure of 1 bar (14psi) [min-1] | 2900 | 2900 | 2100 | 2300 | 1800 | 1800 | 1800 | ||||||
Ambient temperature range | -15C to + 60% (5 "to 140 * F) | ||||||||||||
Maximum case pressure | Absolute pressure 2 bar (29psi) (measured pressure 1 bar) | ||||||||||||
Exhaust pipe | The discharge pipe must be installed to ensure that the RKP body is always filled with pressure liquid. The absolute pressure of the discharge port must not exceed 2 bar (29 ps). The end of the tube must be below the liquid level. There must be no filters or check valves in the drain. | ||||||||||||
Drive type | Use coupled direct drive |
Related Products
Packing&Shipping
In order to ensure that the product is not damaged during transportation, we will choose to use high-hardness cardboard boxes or wooden boxes to package the product according to the volume of the product, and adopt protective measures such as foam anti-collision and wooden frame fixing to ensure the safe and non-destructive delivery of the goods to the greatest extent.
Company Introduction
contact us
Service providers in the industrial sector
You May Like
- For MOOG B514 371 123 radial piston pump
- D956Z8003-D Series Closed-Loop Radial Piston Pump for Moog
- High quality Radial Piston Pump D957-0001-D
- Special sale original Daikin VZ50 variable plunger pump
- Daikin Amplifier ZE-Z-40/ZE-2-30/ZE-3-10
- Axial variable piston pump DAIKIN HV120SAES-LX-11-30N05
- High pressure internal gear pump IPVAP 6-100 101 Low noise gear pump
- High-pressure Internal Gear Pumps for Variable Speed Drives IPVP 4-32 171
- High-pressure radial piston pump D957-2003-D
- Germany gear pump IPV 7-125 string Rexroth plunger pump SYDFE1-071
Popular Searches
Find Similar Products By Category
You May Like
- High-pressure radial piston pump D953-2021-C series pumps
- High pressure radial piston pump string gear pump 2518 218 591
- Rexroth Oil Pump A10VSO/SYDFE1/SYDFEE/SY2DFE1 Variable plunger pump for injection molding machine
- Low noise gear pump IPV IPVP IPC IPVAP Internal gear pump
- CML servo variable piston pump CM-38-S-21-00 replace Yuken series piston pump
- Taiwan CML CM-59-X-2109-00 servo variable piston pump replace Yuken series hydraulic pump
- D957 series radial piston pump or hydraulic pump D957-0001/D D957-0035
- For Nissei injection molding machine Daikin Axial piston variable displacement pump HV166SAES-LX-11-30N05
- Kawasaki variable plunger pump K4V270-119L-EPC-11E hydraulic pump
- Radial piston pump parts D951/D952D/D953/D954/D955/D956/D957series
- D956 Triple Pump Series high pressure radial piston pump
- Double pump B514 064 948 Radial Piston Pump
- Bosch high Pressure radial piston pump 0514 700 433
- HAWE R type hydraulic pump radial plunger pump R6,1
- Special supply HAWE radial plunger pump R14,2 hydraulic pump