LDH75/100 PI-E High Pressure Electric Cement Grout Pump
The LH75/100 high pressure vertical grouting pump is designed and made for permeation grouting, compaction grouting, backfilling grouting, curtain grouting, high pressure split grouting etc, grouting methods.
Grouting material: cement mixture, mortar/plaster, bentonite and other additive.
Specification of grout pump
Item | LH75/100 PI-E grout pump |
Piston diameter | 100mm |
Piston stroke | 150mm |
Adjustable pressure ( low pressure) | 0-50Bar/725psi |
Adjustable flow rate( low pressure) | 0-75L/min |
Adjustable pressure ( high pressure) | 0-100Bar/1450psi |
Adjustable flow rate ( high pressure) | 0-40L/min |
Discharge pipe size: | M27x2 |
Inlet pipe size: | G2’’ |
Power Unit | 7.5kW |
Chassis | Skid |
Weight | 390Kg |
Overall Dimension | 1040x550x1650mm |
Note: Chassis: Skid or Tyre We also could according to your demands to customize | |
Applications of grout pump
Civil Engineering -dam foundations, tunnels, mining, soil nails, tiebacks, earth anchors, cable and rock bolts
Structural – building and bridge restoration, foundation stabilization, foundation raising, soil compaction grouting; soil & rock grouting
Construction - pavement under sealing, slab jacking and slab raising
Marine - underwater foundations, piers, breakers, shoreline foundations
Mining - tunnel lining, contact grouting, shaft waterproofing
Utilities - encasements, waterproofing, slope line grouting
Geotechnical - deep well casing, monitor wells, well sealing and abandonment
Features of grout pump
Compact structure, light weight, easy operate, low maintenance cost;
With digital display counter: it can display at any time, and can accumulate work times;
Flow and pressure can be adjusted step-less;
Equipped with emergency unloading valve: in case of an emergency, it can be load-off instantly;
In low pressure, it will be flow-converging of two pumps; In high pressure, there is only one pump work. Low pressure and large flow, high pressure and low output;
With full-hydraulic shaft device,stable and reliable operation;
Cooling type: water-cooling and air cooling; Suitable for hot and cold areas.
During-sale service:
1. Acceptance of the product
2. Assist client product construction scheme
After sale service
1. Spare parts will be delivered as you need.
2. Engineers will go to clients’ site for guiding the installation and test-running;
3. Warranty period: 12 months since the installation and commissioning;
We also have other grouting equipment, please click below photos for your reference:
For more information about grout pump, please feel free to contact us.