1HP~4HP High Duty DTM CM Series Centrifugal Pump
1. Working conditions:
Max temperature of fluid up to: 80℃
Max ambient temperature up to: 40℃
Max Pressure: 10bar
2. Structural characteristics:
Pump casing: Cast iron
Impeller: Brass/cast iron/aluminum
Motor : Closed,externally ventilated
Mechanical seal: Stainless steel(carbon- ceramic)
Shaft: 45# steel or stainless iron
Insulation class: B and F
Protection class: IP44 and IP54
Thermal protector(if required)
3.INSTALLATION AND APPLICATIONS
These pumps are suitable for pumping clean water and fluids which are not chemically aggressive to the pump components.
They are extremely reliable, simple to use, quiet and virtually maintenance-free, finding many uses in domestic and civil applications, and in particular the automatic distribution of water from small and medium-size surge tanks, transferring water,Watering gardens, etc.
These pumps should be installed in a covered area. protected against the weather.
They are extremely reliable, simple to use, quiet and virtually maintenance-free, finding many uses in domestic and civil applications, and in particular the automatic distribution of water from small and medium-size surge tanks, transferring water,Watering gardens, etc.
These pumps should be installed in a covered area. protected against the weather.
| DTM CM Series Centrifugal Pump | |||||||||
| Model | Power | Q.MAX | H.MAX | S.Head | Speed | Pipe Dia | N.W | Packing size | |
| W | HP | (L/min) | (m) | (m) | (r.p.m) | (Inch) | (kg) | (mm) | |
| DTM-16 | 1100 | 1.5 | 300 | 16 | 9 | 2850 | 1"*1" | 20 | 340*210*250 |
| DTM-20 | 1500 | 2 | 420 | 20 | 2"*2" | 22 | 410*220*275 | ||
| CM-20 | 750 | 1 | 165 | 18 | 1.5"*1.5" | 14 | 310*175*225 | ||
| CM-30 | 1500 | 2 | 420 | 20 | 2"*2" | 24 | 395*220*220 | ||
| CM-40 | 2200 | 3 | 600 | 22 | 3"*3" | 34 | 440*280*220 | ||
| CM-50 | 3000 | 4 | 860 | 24 | 3"*3" | 40 | 420*320*240 | ||
