Specifications
small lpg transfer pump ,use for between tank and tank or to cylinder.
cheap and easy to operate
Liquefied petroleum gas pump guide is my factory in tiny, on the basis of liquefied petroleum gas pump, according to customer needs, improve. The inlet and outlet of the pump can be modified multiple interfaces, to improve the efficiency of canned. {this pump is two import an export}. The pump power can also be used ordinary household two-way used. Two cylinders to pour a cylinder, for example, fill 15 kg is about two minutes.
Model number: YQB2-5 flow quantity: Q = 5-10 l l/min pressure difference: P = 0.1 0.5 MPa pressure: delta P = 1.6 MPa transfer speed: h = 780 r/min motor power: N = 2.2 KW electric pressure: V = 380/220
Mainly used for liquefied petroleum gas cylinders, and similar suction properties and other similar chemical products. Method of use:
1. With a pump inlet rushed through to have the cylinder, the opening Angle of the cylinder valve, upside down the cylinder. {it is best to the cylinder export is higher than the pilot pump} to see if pressure gauge pressure. Normal pressure is about 2 kg.
2. Switch on the pump outlet rushed to rob, used for the first time to exhaust the air in the pump, and then turn on the air cylinder, open all the switch.
3. Test, with the hand disc wheel, check whether there is sundry inside the pump, start the power switch sides to test pump. To sign with the shield} {pump 4. Parking, empty cans filled to cut off the power shut down, close the valve.
Note: user before use, such as using common household two-phase electricity, starting current and voltage must comply with the pump motor power configuration, so as to avoid damage to the motor. Pump in use, it is strictly prohibited, inversion. If you don't out of the fluid pump discharge, should immediately stop the pump, check the inlet cylinder for liquid. To prevent pump damage. {weighing cylinders use electronic scale for the best, the change of the digital can be judged whether there is a fluid.] if there is a small amount of water in the cylinder, and disable the cylinders in winter, ice blocking line easily. The possibility of failure and the elimination method: one: no pressure, no liquid. {1} check to. {2} check switch, the cylinder valve, import filters in the pipeline blockage, look for the liquid on the cylinder. Two: the vibration and noise. {1} to check whether the outlet valve is opened. {2} bearing is damaged, change bearing.
Model number: YQB5-5 Flow quantity, Q = 10-20 l l/min Differential pressure: delta P = 0.3-0.3 MPa Pressure of work: P = 1.6 MPa The transfer speed: h = 900 r/min The motor power: N = 3 kw Electric pressure: V = 220 V