200W fuel dispenser manufacturer,fuel dispensing unit,fuel dispenser pump equipment
Model: RA-EP-D2
1. Cast iron material
2. Cert: IP-55
Specification | |
Voltage | DC 24V |
Rated Power | 0.27HP/200W |
Rated Current | 12 amps |
Speed Range | 3000rpm |
No-load speed | 4000rpm |
Max suction | 3m |
Max lift | 6m |
Flow rate | 40L/min |
inlet/outlet port fitting | BSPT 3/4" |
Bypass valve | Yes |
Packing info. | |
Inner case: | 30x17x16cm |
G.W./N.W: | 4.5/4.3kgs |
Packing | 6pcs/carton |
Outer Carton | 53x31x34 |
G.W./N.W: | 30/29kgs |
Qty for 20'GP | 2900pcs |
Qty for 40'GP | 5800pcs |
Self Priming Vane type Pump
Ideal for fueling diesel and kerosene on construction machinery fields.
Cast iron material for pump body. Sintered steel Rotor. Acetalic Vanes. Fluroelastomer Seals
Duty Cycle: 30 minutes run time
The diesel pump has passed strict heat resistance and earthquake resistance test.
Relief valve(venting valve) inside the pump head will efficiently protect the motor when overload.
It's of great self-sucking strength and swift fueling.
The rotating blade is made of powder metallurgy steel, it's more durable then common steel material.
Fuse protection for overload current is optional.
Accessary:
7ft power cable with brass battery clips.
3/4" inlet and outlet kirsite fitting and stainless steel filter for cleaning.
clamps, teflon tape, socket head wrench, screws and nuts