Pulley Teeth Profile
HTD: 3M,5M,8M,14M,20M
T&AT: T2.5,T5,T10, AT5,AT10,AT20
English pitch: MXL/ 0.80" , XL/ 1/5" ,L/ 3/8" ,H/ 1/2" .XH/ 7/8" , XXH/ 1.25" ,
STPD: S2M,S3M,S4.5M,S5M,S8M,S14M
RPP: 5M,8M,14M,20M
PGGT (PowerGrip GT):2MR,3MR,5MR,8MR,14MR
PCGT (Poly Chain GT):8M,14M
Bort type: taper bore
pilot bore/straight bore
Pulley Materials:Aluminum,Steel,Copper
Size range:Teeth Number from 9 to 216; O.D. from 10mm to 1000mm;
Feature:
1. high power transimssion capacity;
2. high torque transmission capability;
3. no noise, high efficiency, low maintainance;
4. lowest radial load on it's support
Belts and pulley of our company can be attachment or replacement of imported belts and pulleys.
Please supply drawing when you order. We can also draw for clients as their supplied specification, hole, key way and width.
Outside diameter of pulley and size should be as form's regulation.
We can also produce pulley even size are not in the form.
The material of pulley mainly composed of carbon steel, if possible aluminum alloy or copper can also be employed; if external diameter is larger than 250 mm, iron is used.
The pitch&tooth type of double sided timing belt is same as synchronous belts.