Specifications
Black Conductive PU Foam.
1.) Conductive
2.) ESD safe
3.) custom size are available
4.) packing foam
Black Conductive PU Foam
Conductive property good for grounding IC leads against ESD damage |
Suitable for semiconductors storing and shipping |
Non-corrosive and good cushioning effect |
Available in high density, semi-hard and low density foam |
Surface resistivity <106 ohms/sq |
Specification For Black Conductive PU Foams
Typical and Data Test Method
Density | 3.1 lbs | ASTM D3575-84 |
Surface Resistivity | L104 | ASTM D991-85 |
Volume Resistivity | 1.1 x 103 | ASTM D991-85 |
H.C.F.C. | Chemically Insert | Fed STD 101 °C Method 3005 |
Static Decay | .01 Sec. | ASTM D991-85 |
Tribo Charge | Pass | Modified Incline Plane (Bellcore) |
Non-Corrosive
Chlorides | 0.21% |
Sulfates | 0.01% |
Conductive Corss-linked Polyethylene Nominal Specifications ELECTRICAL PROPERTIES
Typical #118alue
PROPERTY | TEST METHOD | UNIT OF MEASURE | LCX-200 | |
Volume Resistivity | ASTM-991(1) | OHM-CM | <10 4 | |
Static Decay Rate | Fed. Std. 101 Method 4046 (2) | Seconds | <.01 | |
Static Decay Rate | '(3) ASTM-D257 | OHMS / Square | <5 x 10 5 | |
Surface Resistance | '(4) NFPA-56A | OHMS | Solid Sheet | < 2 x 10 5 |
Shunt Resistance | '(5) | OHMS | < 16K
|