KL6LM(A) mining helmet lamp 6000mAh intrinsically safe
KL6LM(A) is intrinsically safe, can be used in mines with explosive atmospheres and occurrence of combustible dust.
LED constant current drive built in the lamp to make sure the high light illumination basically stay 7500lux after lighting 11
hours, three working mode: high light and low light for working, SOS function send light signal for rescue in emergency.
Current-limiting resistance, quick-melting fuse, over-current and overheat protective device built in headpiece make lamp work safely.
Specification
LED constant current drive built in the lamp to make sure the high light illumination basically stay 7500lux after lighting 11
hours, three working mode: high light and low light for working, SOS function send light signal for rescue in emergency.
Current-limiting resistance, quick-melting fuse, over-current and overheat protective device built in headpiece make lamp work safely.
Specification
Battery | Li-ion, 6000mAh | ||
Rated voltage | 3.7V | ||
Lighting time | ≥ 16 hours | ||
Main light source max illumination (At 1m apart from the lamp) | Lighting begin | ≥ 8000Lux | |
After 11 hours | ≥ 8000Lux | ||
Light source display mode | High light - Low light - SOS signal (three short - three long - three short) | ||
Charging voltage | DC(6-8)V | ||
Charging time | <10 hours | ||
Explosion protection | Ex ia I Ma | ||
Protection grade | IP65 | ||
Dimension | Head piece | Φ71*77 mm | |
Battery pack | (128*46*118) mm | ||
Lamp lifespan | > 2 years | ||
Weight | 700g | ||
