TDS for PP drum ink
1. Substrates:
PP materials, special for PP drum/barrel.
2. Properties:
High gloss, alcohol resistant, good adhesion, scratch resistant, vivid color, etc.
3. Thinner Addition: 5-10%.
4. Mesh suggested: Above 120T.
5. Drying conditions: 15mins at 60℃ or 24 hours for air dry.
6. Storage in dry, ventilated place under normal temperature(20-25℃). Avoid direct sun exposure.
7. Please make a self-test for different substrates before use to avoid quality problem.
8. The validity is one year at 20-25℃ and humidity ≤80﹪.
Please make a self-test and then check the results if the products are over one year.
Test items | Test standards | Test results |
Viscosity | 25000±3000 mpas | 25000 mpas/25℃ |
Fineness | fineness gage ≤12μm | ≤12μm |
Color Shade | Visual inspection after print | OK |
Gloss | 80° | 85° |
Adhesion | Not come off by nail | OK |
Overprint | Not come off by nail | OK |
Acohol resistance | Rub more than 100 rounds with 500G strength | Above 100 rounds |
Drying | 15 mins at 60℃ | 15 mins at 60℃ |
THE END