Product Description
2016 newly designed with more vivid color lighter smell Konica head solvent based ink
| Item | Suitable for the followings Solvent-based printers |
| WER-256/42 | large format printers with Konica256 42pl print head |
| WER-256/14 | large format printers with Konica256 14pl print head |
| WER-512/42 | large format printers with Konica512 42pl print head |
| WER-512/35 | large format printers with Konica512 35pl print head |
| WER-512/14 | large format printers with Konica512 14pl print head |
| WER-1024/42 | large format printers with Konica1024 42pl print head |
| WER-1024/14 | large format printers with Konica1024 14pl print head |
Physical parameters
Flash point: 62 centigrade
Viscosity: 8-15CP
Filter precision: <0.2micron
Surface tension: 24-36Mn/m
Optical density: >1.3
Particle Size: < 0.2 u
Light-fastness: 7 ~ 8
Odor: Slightly
Features
The type of Konica solvent ink has better chroma luminance and color saturation
It can flow out of the print head smoothly, the viscosity will change to a small extent as the temperature alters. When being used, the product will not have discontinuous problem or clog the print head
It may corrode the print head in a lower degree and has exceptional stability in respect of intermittent printing, long-term storage as well as printing at either high or low temperatures
The light fastness of the pigment contained in the solvent ink is at 7 to 8 level. Accordingly, the product is excellently sun-proof. Furthermore, on the print media, it has the ability to resist water, scraping and grinding.
Our product has little odor, no pollution to environment and no damage to human body. Thus, it is truly eco friendly.
The print media can be applied to include photo paper, pvc foam board, car sticker and flex banner
Flash point: 62 centigrade
Viscosity: 8-15CP
Filter precision: <0.2micron
Surface tension: 24-36Mn/m
Optical density: >1.3
Particle Size: < 0.2 u
Light-fastness: 7 ~ 8
Odor: Slightly
Features
The type of Konica solvent ink has better chroma luminance and color saturation
It can flow out of the print head smoothly, the viscosity will change to a small extent as the temperature alters. When being used, the product will not have discontinuous problem or clog the print head
It may corrode the print head in a lower degree and has exceptional stability in respect of intermittent printing, long-term storage as well as printing at either high or low temperatures
The light fastness of the pigment contained in the solvent ink is at 7 to 8 level. Accordingly, the product is excellently sun-proof. Furthermore, on the print media, it has the ability to resist water, scraping and grinding.
Our product has little odor, no pollution to environment and no damage to human body. Thus, it is truly eco friendly.
The print media can be applied to include photo paper, pvc foam board, car sticker and flex banner
Key points on using WER inks
1. Follow our instructions/using suggestions to flush out the whole ink supply system with our cleaner before using WER inks for the first time.
2. Before changing WER inks with other brands to products, you are suggested to flush out the whole ink supply system and print-heads with cleaners of our brand.
3. Check firstly if there is air in ink reservoir when losing nozzles happened. Discharge air out off ink reservoir if needed. Regularly clean-up on the sponge in ink reservoir is recommended for the purpose of lowering the chances of “nozzle clogging”.
4. Even if the printers are possibly not to be operated for a long period of time, try to turn on and run them at least once a week to ensure the clearance of ink paths and print-heads
Precautions before changing to WER ink
1. Make sure the equipment/printer runs properly under normal working conditions.
2. Completely discharge remainders of the former ink product.
3. Flush out the whole ink supply system with cleaner offered by the previous ink supplier. Then flush out the whole system again with our cleaner.
4. Make the ink tanks dried before recharge WER inks.
5. After recharge WER inks into ink tanks and set those tanks properly in ink supply system, you can start a trial print.
1. Follow our instructions/using suggestions to flush out the whole ink supply system with our cleaner before using WER inks for the first time.
2. Before changing WER inks with other brands to products, you are suggested to flush out the whole ink supply system and print-heads with cleaners of our brand.
3. Check firstly if there is air in ink reservoir when losing nozzles happened. Discharge air out off ink reservoir if needed. Regularly clean-up on the sponge in ink reservoir is recommended for the purpose of lowering the chances of “nozzle clogging”.
4. Even if the printers are possibly not to be operated for a long period of time, try to turn on and run them at least once a week to ensure the clearance of ink paths and print-heads
Precautions before changing to WER ink
1. Make sure the equipment/printer runs properly under normal working conditions.
2. Completely discharge remainders of the former ink product.
3. Flush out the whole ink supply system with cleaner offered by the previous ink supplier. Then flush out the whole system again with our cleaner.
4. Make the ink tanks dried before recharge WER inks.
5. After recharge WER inks into ink tanks and set those tanks properly in ink supply system, you can start a trial print.
Sample Show
WER certificates
Visiting customers
Contact us