Specifications
1.water pump pressure switch2.easy installation
3.electric and intelligentized
4.High quality,reasonable price
The automatic pump pressure switch is widely used in Self-priming pump/Jet pump/Garden pump/Clarified water pump and so on. It can start and stop the pump automatically. This unit completely replaced traditional pump control system, and more easily to install.
Model number: JH-5.2
Color: as your requirement
Brand name: JIAHONG (or make customer’s brand)
Technical parameters:
| RATED VOLTAGE | 220V-240V 110V-120V 110V-230V |
| FREQUENCY | 50/60HZ |
| MAX CURRENT | 10A |
| MAX POWER | 1.1KW 1.5KW |
| INITIAL PRESSURE | 0.8~2.8bar |
| MAX PRESSURE | 10BAR |
| INTERFACE THREAD | R1” |
| PROTECTION CLASS | IP65 |
| MAX WORKING TEMPERATURE | 60°C |
| CABLE SPECIFICATIONS | 7.5-9MM |
Function:
1.Electric switch used in water systems,start and stop the pump automatically
2.Examine the water automatically,stop the pump in the case of water shortaget,protect the pump from damage caused by dry-running
3.Completely replaced traditional pump control system composed of pressure switch,pressure tank and check valve,etc.
State Led:
1. Red led (state one) light up: The unit is off
2. Green Led (state two) light up: the pump stop
3. Red Led( state one) and green Led( state two) flash alternately in slow speed:pump in operation
4. Red Led (state one) and green led (state two) flash alternately in high speed: pumb stops: waiting to start
5. Press the ON/OFF button for one second to start the unit: press the ON/OFF button for five seconds to stop the unit
