Introduction
CS-PT100 series of pressure transmitter are cost effective products featuring mass production and low cost. They are widely used to detect the pressure of gas and liquid like water and nature gas.
The products are made of stainless steel. the pressure sensing elements are selected from well-known international brands. Special circuits are adopted to zero and full range conveniently. The products are approved with CE, intrinsically safe, and explosion proof certificates.
Customized structures and output formats can be designed according to special application requirements, in addition to standards products.
Technical parameters
Parameters | Value | Note | ||
Measure Range | 0.2Mpa~35MPa | 1MPa≈145PSI | ||
Overload Pressure | 2×RP(rated pressure) |
| ||
Broken Pressure | 4×RP(rated pressure) |
| ||
Accuracy | ±0.5%, 1% (PT300 & MARS series have higher accuracy) |
| ||
Stability | Typical 0.25%F.S, Max 0.4%F.S |
| ||
Operate Temperature | -40℃~85℃ |
| ||
Compensation Temperature | -10℃~70℃ |
| ||
Media Compatibility | Corrosive medium compatible with Cr18Ni9Ti |
| ||
Wire | Two-wire | Three-wire |
| |
Output Signal | 4~20mA | 0~5V | 0~10V |
|
Power Supply | 12~30Vdc | 10~30Vdc/ac | 12~30Vdc/ac | dc/ac means dc and ac are all usable |
Load Resistance | (U-10)/0.02(Ω) | >20k Ω |
| |
Insulation | >100M Ω |
| ||
Elec. Connect | DIN43650, Shell protection IP65 | Hirschmann Plug(S) | ||
| GX16-7, Shell protection IP45 | Quick Access Plug(K) | ||
| Wire protection (Five), Shell protection IP68 |
| ||
Pressure Port | M20×1.5, G1/2, G1/4, NPT1/2, NPT1/4 |
| ||
Response Time | 10ms |
| ||
Pressure Form | Gauge G , Absolute A |
| ||
Compliant | CE,Intrinsically safe E, Explosion-proof D |
| ||
EMC | EMI: EN50081-1/-2; EMS: EN50082-2 |
| ||
