Low Resistance and 1 to 1200uH SMD Shielded Power Inductor
Providing with quality and standard customer-made electronic and passive components smd shielded inductor and solution products, Fullstar Electronics is a leading smd shielded inductor manufacturer and supplier in China. welcome to wholesale electronics low profile smd inductor, low resistance smd power inductor, low dcr smd power inductor, high-current smd shielded inductor, magnetic shielded surface mount inductor from our factory.
SMD SHIELDED INDUCTOR
Features : Low Profile SMD Power Chip Inductor with Low Resistance and 1 to 1,200uH Inductance
Low DCR SMD power inductor
Large-current SMD power inductor SMD magnetically shield power inductor
Shielded SMD power chip inductor
Magnetic shielded surface mount inductor with high current rating
Low profile and shielded very effective in space-conscious applications
Low resistance to deep power loss minimum
Temperature rise: 40 degree Celsius maximum
Rated current: base on temperature rise and L/LOA: 15%maximum
Operating temperature: -40 to 105°C (contain heating coil)
Storage temperature: -40 to +125 degree Celsius
Appearance inspection: no external defect by visual inspection
Terminal strength: after soldering, between copper plate and terminals of coil, push in two directions of X, Y with standing as below conditions
Terminal should not peeled off
Heat endurance of reflow soldering: 240
Insulating resistance: over 100MΩ at 100V DC between wire and core
Dielectric strength: no dielectric breakdown at 100V DC for one minute between wire and core
Temperature characteristic: inductance coefficient (0 to 2,000) x 10-6/(-25 to 80°C) inductance deviation within ±5.0%, after 96 hours
Humidity characteristic: in 90 to 95% relative humidity at 40 ± 2 and one hour drying under normal condition Inductance deviation within ±5.0% after vibration for one hour
Vibration resistance: in each of three orientations at sweep vibration (10/55/10Hz) with 1.5mmp-p amplitude