Delivery Time:As soon as payment confirmed
Certification:CE
UniMAT CPU 14DI / 10DO Programming Logic Controller Compatible With Siemens PLC
Quick description :
1). 14DI, 10 DO with relay
2). Communication Ports: 2RS - 485, both support PPI protocol ;
3). Supports expansion modules : 7 modules ;
4). Compatible with Siemens 224 CPU ;
5)). 3- year warranty ;
6). Siemens software is ok.
Detail description :
| Technical specifications | |
| Model | CPU224 AC/DC/Relay |
| Physical characteristic | |
| Dimensions(W x H x D)(mm) | 120.5×80×62 |
| Power consume | 10W |
| Memory | |
| Program memory size | |
| With run mode edit | 20K bytes |
| Without run mode edit | 20K bytes |
| Data memory | 10K |
| I/O | |
| Local digital inputs | 14 inputs |
| Local digital outputs | 10 outputs |
| Digital I/O image size | 256(128 inputs /128 outputs) |
| Analog I/O image size | 64(32 inputs / 32 outputs) |
| expansion modules allowed (Max) | 7 modules |
| intelligent modules allowed (Max) | 7 modules |
| Pulse catch inputs | 14 |
| High-speed counters | 6 counters total |
| Single phase | 6 at 30KHz |
| General | |
| Timer | Total number: 256 (1ms:4;10ms:16;100ms:236) |
| Counters | 256 |
|
Internal memory bits stored on power down |
256 |
| Time interrupts | 2 with1ms resolution |
| Edge interrupts | 4 up and / or 4 down |
| Analog adjustment | 2 with 8 bit resolution |
|
Boolean execution speed |
0.08µs per instruction |
| Real Time Clock | Built-in |
| Communications Built-in | |
| Ports | 2 RS-485 ports, within1standard PPI port |
| PPI Baud Rates | 9.6,19.2 and 187.5 kbaud |
| Freeport Baud Rates | 1.2kbaud to 115.2kbps |
| Max. cable length per segment |
With isolated repeater:1000 m up to 187.5kbaud, 1200 m up to 38.4kbaud Without isolated repeater: 50 m |
| Max. number of stations | 32 per segment, 126 per network |
| Max. number of masters | 32 |
| Peer to peer(PPI Master Mode) | No |
| Power | |
| Input voltage | 85 to 264 V AC(47 to 63Hz) |
| Input current | 60/30mA while CPU only at 120/240V AC |
| 200/100Ma while Max. load at 120/240V AC | |
| Inrush current | 20A at 264 V AC |
| Isolation(field to logic) | 1500 V AC |
| Hold up time(loss of power) | 1s at 120/240 V AC |
| Sensor voltage | 20.4 to 28.8 V DC |
| Current limit | 1.5A peak, thermal limit non-destructive |
| Ripple noise (sensor to logic) | Less than 1V peak-to-peak |
| Isolation (sensor to logic) | Not isolated |
| CPU Digital Input Specifications | |
| Built-in digital input | 14 inputs |
| Input type | PNP/NPN |
| Rated voltage | 24 V DC at 4mA |
| Max. continuous permissible voltage | 30V DC |
| Surge voltage | 35 V DC,0.5s |
| Logic “1” voltage range | 15 to 30 |
