Specifications
200M Powerline AdapterWallmount type
Power voltage range of 100 to 240 V AC 50/60Hz
HomePlug AV compliant
Parameter | Specification |
System SPEC | |
Chipset | Intellon INT6300 |
SDRAM: | 128Mbits |
Serial Flash | 16Mbits |
Firmware | Support North America/Europe/APAC/Japan |
Feature and Technology SPEC | |
Protocol | HomePlug AV 1.0 IEEE 802.3 10/100 Ethernet (100Mbps) IEEE 802.3u Fast Ethernet Co-exists with existing HomePlug 1.0 |
System Support | Windows 98SE, 2000, ME, XP 32/64 bit and Vista 32/64bit |
PLC Rate | 200Mb |
Data Rate - TCP/UDP | 65Mbps TCP 90Mbps UDP |
Modulation Band | 2-30MHz |
Modulation Schemes | Supports1024/256/64/16/8-QAM, QPSK,BPSK and ROBO |
Encryption | 128 AES |
QoS | Support contention-free access, four-level priority based contention access, and multi segment bursting Support VLAN Priority Support ToS and CoS Packet Classifier |
Work Mode | TDMA and priority based CSMA/CA |
Multicast Support | Supports IGMP managed multicast sessions |
IPv6 | Support |
SNMPv2 or v3 | Support |
Typical Coverage | Up to 5000 square foot home The actual Coverage will vary with the power grid and the number of PLC terminal device. |
LED’s | Power Ethernet: Ethernet Link and Activity Data: PLC Link and Activity |
Push Button | RESET: Restore the default factory parameter NMKSET: Set up network password automatically |
Power Socket | Support British, Euro, Japan, US and China power connector |
Ethernet Interface | 1 x RJ45 for 10/100 Ethernet (Auto MDI/MDI-X) |
Consumption | 5W |
Environment Requirement | |
Operating Temperature | 0º to 45º C |
Storage Temperature | -20 º to 70 º C |
Operating Humidity | 10% to 90% Non-condensing |
Storage Humidity | 5% to 90% Non-Condensing |
Input Rating | 100-240 VAC, 50/60Hz |
EMC and Safety | |
Regulatory Compliance | FCC Part 15 Class B CE |
Safety Regulations | UL |
Green Standard | RoHS |
Physical Dimension | |
Physical Characteristics | L×W×H:105mm×72mm×59mm |
Weight | 149g |
