Specifications
Paddle flow switches, reed switch contact,inside barbed tee for 1 soft tube,
Type: R1Q
Main features:Tee equipped with paddle flow switch, for spas and swimming pools applications, mounting on 1” (20 to 21mm ID) soft PVC tubes, adjustable setting.
Used on water circulation circuits to detect the passage of water or filter clogging and avoid dry running. Recommended mounting position is on horizontal pipes, but can be mounted in any position allowing an efficient air bleed.
Functional principle: Balanced magnetic pallet mounted perpendicular to the flow and activating a reed switch through the wall. The return of the pallet is by made by magnetic action, without spring. No seal or liquid can pass between the piping system and the electrical contact. Suitable for corrosive water pools and spas and salination chlorination and bromination systems. Must not be used for water containing magnetic particles or high viscosity liquids, which block the movement of the pallet.
Adjustment: By means of the adjustment screw located under the protective cover. This setting must be carried out only by professional, qualified and trained personnel, as a too low setting can produce an insufficient pull-back force and malfunction. This adjustment is designed for single use and can be sealed.
Main housing material: Polypropylene, resistant to ozone and water disinfection products, usable with potable water.
Tee material: PVC
Paddle: Polypropylene, 15 mm width
Paddle shaft: Titanium, providing an outstanding corrosion resistance, and improved mechanical live
Electrical rating: Max 1A, Max 70W, Max 250V, resistive load. Use on inductive circuits reduces electrical rating. We recommend to protect the reed switch with contact protection device when used in inductive loads
Electric contact type: Normally open, closes by flow rise
Liquids compatibility: For use with clean water and liquids without magnetic particles and without chemical incompatibility with polypropylene and titanium
Nominal pressure at 20°C: 0.3MPa (PN3)
Average flow detection values (Liters/min)
Calibration | *Close | **Open |
Low span end (1gr) | 4,3 | 3,7 |
Middle span (2grs) | 5,7 | 4,8 |
High span end (4grs) | 7,4 | 6,9 |
* Close by flow rise (L/min) of contact open at no flow position ** Open by flow decrease (L/min) of contact open at no flow position. Average values for indication only. Standard tolerances ±30%
Liquids temperature range: 5 to 45°C
Ambient temperature range: 5 to 45°C
Ingress protection: IP65
Electrical connection: 2 x AWG24 (0.2mm²) cable, PVC insulation, T80°, style UL2464.
Installation instructions: Water circuit in spas and pools can contain air bubbles, it is important to prevent them stagnate in the unit of measure and originate false flow measurement. Therefore the air bleeding orifice must be located above and connected
Options: cable with connector or terminals, other cable length.
Reference
Calibration | Cable length | |||
| 500mm | 1m | 2m | 3m |
Low span end (1gr) | R1Q613348S15P050 | R1Q613348S15P100 | R1Q623348S15P200 | R1Q613348S15P300 |
Middle span (2 grs) | R1Q623348S15P050 | R1Q623348S15P100 | R1Q623348S15P200 | R1Q623348S15P300 |
High span end (4grs) | R1Q643348S15P050 | R1Q643348S15P100 | R1Q643348S15P200 | R1Q643348S15P300 |
JPCI Controls (Foshan Gaoming) Co., Ltd
Member of Ultimheat alliance
Ultimheat is a registered trademark, all rights reserved
Contact : Michelle Mai
T: +86 757 88638729
F: +86 757 88681850
Website: www.ur-brand.net www.ur-brand.net www.ur-brand.net http://www.ultimheat.com
http://www.ultimheat.cn
http://www.jpci.cn
Company profile:
Established in China since 2000, with French technology and investment, our company is proud to have more than 60 years experience in manufacturing electromechanical components and 30 years experience in manufacturing safety component for Spas, swimming pools and hot tubs. This experience, combined with high tech equipment and high tech raw materials let us develop the new components needed by rapid expansion of Asian and Chinese market.
In our new factory, on more than 8000 square meters production lines, we have two manufacturing divisions:
Division one is producing components:
Thermostats, energy regulators pressure switches, level switches, flow switches, fire detection fusible links, heating elements and ceramic connection blocks.
Division two is producing complete assemblies and sub assemblies on customer specifications:
Swimming pools heaters, heat pumps backup heaters, spas heaters, small water heaters, immersion heaters, aluminum foils heaters, baseboard and convection heaters sub assemblies
Our R&D team develops new products upon customer specification, taking care of international safety standard (UL, CE, etc.).
We produce our own stamping, bending, plastic injection, zinc alloy injection, and machining.
We are equipped with up to date automatic and CNC TIG welding and laser welding equipment and ultrasonic welding checking.
We have our own climatic room, corrosion testing loops, salt spray testing, and more than 30 specific equipments for products life testing.
Our income quality control laboratory is equipped to check raw material (plastics, metals) physical characteristics and dimensions.
Our finished product control laboratory has more than 200 machines to calibrate and check temperature, pressure, level and flow controls.
From the raw material to the finished product we control every production step. Meet your control equipment demand rapidly and safely is our consistent promises.
Basic Information
| Product/Service Sell): | Flow switches, level switch,pressure switch, thermostat,heating elements, back up heaters for heat pumps |
| Number of Employees: | 200 to 300 People |
Trade & Market
| Main Markets: | North America |
| Total Annual Sales Volume: | US$2.5 Million - US$5 Million |
| Export Percentage: | 60% |
Factory Information
| Factory Size (Sq.meters): | 10,000 square meters |
| Factory Location: | Datian Cunkou, Fuwan industrial zone,Gaoming of Foshan, Guangdong province,China. |
| Number of Production Lines: | 15 |
| Number of R&D Staff: | 5-10 |
| Number of QC Staff: | more than 15 People |
| Management Certification: | ISO9001/14001 |
| Contract Manufacturing: | Customized products on request (MOQ apply), OEM developments welcome. |