ECTFE Coating Grade Resin
1. Product introduction
As a resin, ethylene chlorotrifluoroethylene is a very pure fluorine copolymer, which not only has excellent mechanical properties, good weather resistance and chemical resistance common to fluorine-containing resins, but also has excellent light transmittance and hardly absorbs visible light and ultraviolet light. In addition, because it contains chlorine atoms, the moisture permeability of all fluorine resins is relatively low, which can prevent many liquids and gases from penetrating, and is beneficial to the anticorrosion and rust prevention of the protected substrate.
2. Technical Parameter
Item | Test Method | Unit | Value |
Density | ASTM D792 | g/cm3 | 1.66~1.68 |
Grain Size | ASTM D1921 | um | 40~80 |
Melting Point | ASTM D3418 | ºC | 215~225 |
Melt Index | ASTM D1238 | g/10min (275ºC,2.16kg) | 8~15 |
3. Mark, Packing, Storage & Transportation
3.1 Mark
The packing bags (boxes) of this product should be clearly marked with firm company name, product name, batch number, brand number (specification number), net content, etc.
3.2 Package
This product is packed in paper barrels (lined with polyethylene plastic bags) with a net content of (20 ± 0.2) kg per barrel. Each barrel shall be provided with a product certificate, including: company name, product name, batch number, brand (specification number), net content and production date, etc. In case of special packaging, the supplier and the Demander shall negotiate separately. Storage
After three months, shaking the drum every week to avoid the deposition.
3.3 Storage
This product should be stored in a clean, cool and dry place to prevent rain, sunshine, moisture, dust and other impurities.
3.4 Transportation
This product is transported according to non-dangerous goods. Moisture and severe vibration should be avoided during transportation.
4. Main Application
4.1 ECTFE coating grade resin is white powder, which has excellent chemical corrosion resistance, excellent barrier performance to various corrosive gases and excellent high and low temperature resistance.
4.2 The electrostatic spraying method can be used for coating protection of reactors, pipelines, storage and irrigation, mixers and other containers in the chemical and semiconductor fields, thus delaying the service life of the equipment.
