12L Pneumatic Grease Pump With Wheels, Portable Anywhere Comfotably.
This is a 50:1 pump & will dispense grease at a pressure equaling approx.40 - 50 times the Air Inlet Pressure. Recommended for applications requiring volume greasing at high pressures in industry, workshops, farm etc.
1.15 Years Concern On Automotive Pneumatic Tools Product manufacturer, all kinds of grease pump suppliers in China.
2. with 12 - 40L wheel-mounted tank.
3. The seamless pressed tank offers maximum guarantee of adherence and functionality of follower plate
4. Unique air motor ensure pump smoth action
5. Suitable for Engine grease Synthetic grease Hydraulic greasegear greaseanti-freeze liquds and allied products
| Product Data | 12L-45L all kinds of pneumatic grease pump |
| Barrel Capacity | 12L-45L |
| Pressure Ratio | 60 : 1. |
| Transmission Pressure | 30 - 40MPa |
| Grease Output | 0.85L/Min |
| Inlet Pressure | 0.6 - 0.8MPa |
| Air Consumption | 230 lt/min (61 GPM |
| Noise Level | 81 db |
| QTY | 1SET/CTN |
| General | 2# - 3#grease |
| Grease hose | 5m Flexible hose |
| Gun | LD-H200 grease gun |
| CTN SIZE | 450x450x837mm |
| G.W. | 10Kg-22Kg |
| N.W. | 9Kg-20Kg |
1. Slide the drum cover over the suction tube & lightly tighten the drum cover with the suction tube.
2. Remove lid from the grease drum / pail.
3. Place the follower plate in the grease drum with the lift handle facing upwards. Push the follower plate down, until some grease is forced through the centre hole on the plate.
4. Lift the pump assembly & slide the suction tube through the center hole in the follower plate. Push the pump assembly down till the bottom of the pump touches the base of the drum. Adjust the drum cover, making sure that it sits firmly on top of the grease drum.
5. Tighten the thumb screws on the drum cover to secure the drum cover with the rim of the drum. Also tighten the drum cover with the pump suction tube.
6. Connect one end of the high pressure grease hose to the pump outlet. Use a thread sealant to ensure leak-proof connection.
7. Connect the other end of the hose to the grease control valve assembly. It is recommended to use a swivel between the hose & control valve. Connect the outlet extension & coupler to the control valve outlet. Use thread sealant on all connections to ensure leak-proof working.
8. With the air supply turned off, connect the air line into the air inlet on the pump. An FRL (Filter-Regulator-Lubricator) unit must be used in the air supply, before it is connected to the pump.
9. Set the regulator to 85 PSI or any required inlet pressure, but never more than 150 PSI or less than 60 PSI.
1. Partially open the on/off air valve. Pump will start operating automatically until it gets primed. Once primed, the air motor will stop.
2. Open the on/off air valve fully.
3. Hold the grease control valve near a waste container & press the trigger. Pump will start operating with continuous grease discharge as long as the trigger is pressed. Release the trigger & this will stop the pump. Check for any leaks from any of the connections. Tighten all connections as required.
4. To grease, connect coupler fitted onto the control valve extension with the greasing point (grease nipple) & press trigger. Be careful not to over lubricate as the pump will keep dispensing grease as long as the trigger is pressed. Once the trigger is released, pump will stop dispensing grease & the air motor will stop.
5. When not in use & at the end of each day, air supply to the pump must be switched off.
Always wear safety glasses when using 50:1 Air Operated grease pump. Keep work area clean and remove any excess grease from tools, hands and clothing after use. Always wear protection gear like safety goggles, gloves, apron, and ear plugs while operating the pump.
Never let any body part come in front of, or in contact with the control valve outlet.
Always cut off air supply after use, so that media can't leak incase any of the pump component fails.
Before attempting any maintenance or repair of this product, disconnect air supply and then squeeze control valve trigger to release fluid pressure.
Before switching the air supply on, check hoses for sign of wear, leak or loose fittings. Replace as necessary.
In case of accident, immediately seek medical attention. Do no try to treat the injury yourself.
Use only genuine factory parts for repair.
Do not smoke when using / near the pump.
Do not use the pump near a source of spark / open flames.
In case of change of working fluid, at least 1 liter (or as desired) of new fluid should be discarded to avoid mixing of fluids.
Operate pump for not more than 4 hours continuously.
Use only natural compressed air for operating the pump . Make sure air quality is very good with no contaminants / moisture. This can be achieved my installing a filter unit in the air line, before the line is put into the air inlet port on the pump.
It is important to use an Air Regulator in the air line which will maintain constant pressure. Recommended air pressure is 85 PSI. Air Pressure must NEVER increase beyond 150 PSI as that may cause the pump to cease. At the same time, itmust not fall below 60 PSI as it will make priming difficult.
Pump needs constant lubrication & a lubricator unit must be installed in the air line.
This pump comes complete with drum cover, rubber lining follower plate, 7’ high pressure grease hose fitted with grease control valve with Z swivel & band dolly
Recommended Use
Light & self collapsing grease upto NLGI No. 2.
Wetted components
Steel, Brass, Aluminum & Polyurethane150 PSI or less than 60 PSI.
After Sale Service:
1.Design and sample made as client's requirements.
2.All the Grease Pump can be repaired and replaced if broken.
3.OEM order is welcomed.
4.Reply to you in 24 hours.
5.Warranty
LIMITED ONE-YEAR WARRANTY
Should this product fail to perform satisfactorily due to a defect or poor workmanship within ONE YEAR from the date of purchase, return it to the place of purchase and it will be replaced, free of charge. Incidental or consequential damages are excluded from this warranty.
Any questions,it is our pleasure to be on service of you!