BLINCE
OMR orbital hydraulic motors of Rolltorq brand are low-speed unit designed to operate at low and medium loads. They are distinguished by a shaft bearings, which greatly increases their life span. BMR form a series of models with maximum speeds between 160 and 775 rpm, and the maximum power up to 10 kW.
Rotational speed range: from 5 through 775 rpm; maximum continuous pressure: up to 140 bar.
The OMR motors are interchangeable with all motors of OMR, MR, OMZR, SMR etc. in general. However, it appears that durability, efficiency and stability of parameters of motors are different from series of motors by various manufacturers.
Features:
Displacement: 51.7 - 401.9 cm3/rev;
Rotational speed range: 5 - 775 rpm;
Maximum pressure: 140/225 (continuous/peak);
Maximum power: 4 - 10 kW.
OMR/OMRS series: | ||||||||||||||||
Type | 36/50 | 80/100 | 125/160 | 200 | 250 | 315 | 375 | |||||||||
Geometric displacement(cm²/rev.) | 36/51.7 | 81.5/102 | 127.2/157.2 | 194.5 | 253.5 | 317.5 | 381.4 | |||||||||
Max.speed(rpm) | cont. | 1250/960 | 750/600 | 475/378 | 310 | 240 | 190 | 155 | ||||||||
int. | 1520/1150 | 940/750 | 600/475 | 385 | 300 | 240 | 190 | |||||||||
Max.torque (N*m) | cont. | 72/100 | 195/240 | 300/360 | 360 | 390 | 390 | 365 | ||||||||
int. | 83/126 | 220/280 | 340/430 | 440 | 490 | 535 | 495 | |||||||||
Max.output (kw) | cont. | 8.5/9.5 | 12.5/13 | 12.5 | 10 | 7 | 6 | 5 | ||||||||
int. | 9.8/11.2 | 15 | 14.5/14 | 13 | 9.5 | 9 | 8 | |||||||||
ure drop (MPa) | cont. | 14 | 17.5 | 17.5/16.5 | 13 | 11 | 9 | 7 | ||||||||
int. | 16.5/17.5 | 20 | 20 | 17.5 | 15 | 13 | 10 | |||||||||
Max.flow (L/min) | cont. | 45/50 | 60 | 60 | 60 | 60 | 60 | 60 | ||||||||
int. | 55/60 | 75 | 75 | 75 | 75 | 75 | 75 | |||||||||
Weight(kg) | 6.5/6.7 | 6.9/7 | 7.3/7.6 | 8 | 8.5 | 9 | 9.5 | |||||||||
*Rated speed and rated torque: output value of speed and torque under rated flow and rated pressure; *Continuous pressure: Max.value of operating motor continuously; *Intermittent pressure: Max.value of operating motor in 6 seconds per minute; *Peak pressure: Max.value of operating motor in 0.6 second per minute. | ||||||||||||||||
If you have any questions, please contact our customer service. During the purchase process, we can meet all your needs. For hydraulic equipment, please look for Blince! |
For optimal working, we recommend the following:
1. Oil Temperature Normal: 200c – 600c Maximum: 900c (maximum one hour)System Filtration: 10µm nominal
A magnet should be installed in the filter or at the bottom of the tank to prevent ingress into the system
3. Viscosity
Based on external ambient temperature and type of application
Recommended Oil Viscosity is 32 – 68mm2/s
4. The motors can be operated in Parallel or Series
When the pressure of the case exceeds 20 Bar, it is recommended to install an external drain line to the tank
5. Various output shaft and flange options are available
5.1 Various Manifold Mount Valving available
6. The optimal operation condition should be at the 1/3 – 2/3 of the rated operation
7. In order to obtain a longer life, operating motor should operate for first hour under 30% of rated pressure Motor must be filled with oil prior to being put under load
BLINCE HYDRAULIC MOTOR
Distribution Type | Model | Displacement (lm/r)(cm3/rev) | Max. Operating Pressure( Bar/Mpa) | Speed Range (rpm) | Max.output power (KW) |
Axial Distribution | BMP/OMP | 36-500 | 225/22.5 | 30-1650 | 13 |
BMR/OMR | 36-375 | 200/20 | 30-1220 | 17 | |
BMH/OMH | 200-500 | 225/22.5 | 30-430 | 18.5 | |
BMM/OMM | 8-50 | 200/20 | 30-1950 | 3.2 | |
BMJ | 65-375 | 200/20 | 30-842 | 17.9 |
Distribution Type | Model | Displacement (lm/r) (cm3/rev) | Max. Operating Pressure( Bar/Mpa) | Speed Range(rpm) | Max.output power (KW) Cont. | Max.output power (KW) Int. |
Disc Distribution | BMSY | 80-475 | 225/22.5 | 30-800 | 20 | 25 |
BMER | 125-750 | 276/27.6 | 30-470 | 18 | 21 | |
BMT | 160-800 | 240/24 | 30-705 | 35 | 40 | |
BMV | 315-1000 | 280/28 | 10-446 | 43 | 52 |
Danfoss :OMM/ OMP/ OMR/ OMH/ OMS/ OMT/ OMV/ DH/ DS series hydraulic motor.
Eaton : J (129-) series, H(101-) series,S(103-) series,T(158-)series,2000(104-) series,6000 series orbit motor
M+S : MM,MLHM/MP,MLHP/ MR,MLHR/ MH,MLHH/ MS,MLHS/ MT,MLHT/ MV,MLHV hydraulic motor.
White : MP/RS/MR/RG/HB/CE/RE series hydraulic motor
Parkers : TE/ TG/ TF series hydraulic motor.
Sam Brevini : BGM/ BG/ BR/ HPR/ HT hydraulic motor
Bosch Recroth : MGX/ MGP, GXP/ MGR, GMR/ MGS, GMS / MGT,GMT/ MGV, GMV series hydraulic motor.
Blince
For hydraulic equipment, please look for Blince!
* Inquiry and consulting support. * Teach how to MOUNTING and USE the hydraulic motor.
* Sample testing support. * Arrange shipment 7-30days and update tracking No.
* View our Factory. * Warranty 1 year.
2. Delivery time: 7-15days after receiving deposite.
3. samples for quality reference are available.
4. Shipping port: Shenzhen/Guangzhou as your require.
Packaging Details:
2. 100pcs plastic/wooden pallet.
3. 1 piece seperate weeden case.
2. Leading time is within 3days if have inventory. If don't, within 30days if the quantity is less than 500pcs.
3. DHL, UPS, FEDEX, TNTetc, usually 5-7 days to arrive.
4. By sea/air, FOB/CIF trade etc, is normally 20-30days.