1. Face& Back: Birch, Pine, Poplar, Okoume, Meranti, Hardwood, Okume,etc.
2. Core: Poplar, Pine, Hardwood,Okume,softwood etc.
3. Glue: WBP, E1, E2, MR, Melamine.
4. Film: Black, Brown, Red
5. Size: 1220*2440mm, 1250*2500, 1250*2550, etc.
6. Moisture Content: 12%.
Application Concrete forming for construction
Moisture: 8-12%
Packing: For transportation of Ocean and Land, Inside Pallet is wrapped with 0.2MM plastic bag,
Steel strip or PVC for strength, More than 2 MM plywood sheet or hard paper covering all the sides left, right, top bottom.
Min Order: 1x40HQ
Payment: T/T or L/C sight
Delivery time: Within 15days after receiving 30% deposit or Original L/C
Film faced construction plywood:
Surface is very smooth, solid, easily ingot stripping,
it is widely used in As-cast Finish Concrete, underwater engineering and Bridge Construction.
Inward board is poplar or birch that Impregnated with phenolic resin,
two surfaces were covered by phenolic resin, or Melamine impregnated Paper, also lay-up and Heat Seal with second times. The surface of this product is very smooth, orderly corner,
not easy to leakage, and concrete strength could be raised with the decrease of water cement ratio.
As against sthbin contrast with sheet steel form, The material of this product is keep hot, heat-shielding, couldn’t influence concrete strength due to changes in temperature.
It will help to increase efficiency and reduce production cost.
1, Black film, poplar core
Glue: MR, WBP; Surface: black film, 240g /m2; Core: poplar; MC: 8-14%.
2, imported film
Thickness: 8 -40MM ; Glue: WBP; Surface: imported film, 120g /m2; Core: poplar, birch; MC: 8-14%.
3, anti-slip film-faced plywood
Thickness: 8 -40MM ; Glue: WBP; Surface: imported film, 165g /m2; Core: poplar, birch; MC: 8-14%.
The products have these features as below:
1)The film is imported brown film, 120g/m2, the film is Stora
-Enso, or Dynea, also could be used by chinese black film or domestic brown film, the density is 240g/m2.
2)The glue is WBP, MR
3)The core could birch throughout, poplar throughout, birch veneer,
hardwood throughout, combi hardwood with poplar core etc.
4)The products could be used in concrete formwork when construction.
5)The size which contain standard size 1220x2440mm, large size 1250x2500mm,
6)The thickness is from 9mm to 21mm
7)The packment is standard wood pallets which could be suit for export.
The inner is by plastic bags, the outer by thin plywood or paper cardboard, then packed by steel strips.
