brown film faced plywood

Specifications

       To obtain full life, cleaning should be carried out immediately after each use. Phenolic fabric film faced plywood may be wiped with release agent or cleaned with water and stiffbrush . It may be necessary to use a hard wood scraper but care should be taken not to damage the plywood face. Do not use a wire brush or sharp metal scraper to dislodge hardened concrete 
CLEANING AND REPAIRAny holes made in fabric film faced formwork panels should also be sealed to prevent water entering. If water does enter it may cause swelling around the holes.
SEALING OF HOLESPhenolic fabric film faced plywood edges are fully sealed at the factory and it is the most important that all edges remain sealed. To obtain full value from a phenolic fabric film faced sheet any recut edges should sealed as soon as possible with water proof paint.
SEALING OF EDGESAlways clean and repair the formwork panels before storage. The formwork should then be stacked off the ground on level supports and under cover. Framed formwork panels should be stacked alternately face and back to back to avoid face damages by bolts etc. If panels are wet, do not allow them to dry too rapidly.STORAGEHOW TO CUT THE BEST FROM OUR FILM FACED PLYWOODCONSERVE AND MAINTAIN: POPLAR                    ABOUT 500 COMBINED                  ABOUT 600 BIRCH                     ABOUT 690 PRODUCTS                  WEIGHT(KG/M3)MOISTURE (8-12%) & DENSITY
(8)Application Concrete forming for construction then packed with sheet iron (7)Packing Inner with plastic bag, outside with 3plywood,(6)Grade A/A grade or requested Chinese black film 180-240g/m2 (5)Film Import dark brown film(Dynea or Store-Enso)120g/m2, (4)Glue WBP, MR    poplar, birch, hardwood, combined or requested by clients(3)Core  Different thickness available, from 4mm to 21mm(2)Thickness  915 x 1830mm, 1220 x 2440mm, 1250 x 2500mm or as requested(1)Size SPCIAFICATONFilm faced plywood