The price contains an adjustable positioner.
GENERAL INFORMATION
1. YJQ-M309 is widely used for the crimping of wires and contacts in electronic connectors.
2. Wire crimp range: 8AWG (8.37mm^2) to 18AWG (0.8107mm^2).
WORKING PRINCIPLES
1. Crimping Method
The crimping tool adopts curve propulsion mechanism, its applied force transfers through four curves in the head cavity of the right plier handle to the four indenters. The four intenders do the centripetal linear motion, which makes its front-end teeth crimp the contact to complete the crimping process. The cycle controlled precision ratchet assures the consistency of impression and the crimping quality of wires and contacts.
2. Crimping Range Adjustment
The crimping tool has eight selector numbers, the accurate data are listed as follows:
Selector NO. | Intender Working Diameter mm/INCH | |
A GO | B NO GO | |
1 | 0.036/0.91 | 0.041/1.04 |
2 | 0.045/1.14 | 0.050/1.27 |
3 | 0.052/1.32 | 0.057/1.45 |
4 | 0.061/1.55 | 0.066/1.68 |
5 | 0.069/1.75 | 0.074/1.88 |
6 | 0.076/1.93 | 0.081/2.06 |
7 | 0.086/2.18 | 0.095/2.41 |
8 | 0.100/2.54 | 0.11/2.79 |
3. Gaging Instructions
- “GO” Gaging: keep the tool in fully closed position, insert the green “GO” gage end into the indenter, it should be easy to enter, otherwise, the selector gear is incorrect
(CAUTION! DO NOT CRIMP GAGE!)
- “NO GO” Gaging: keep the tool in fully closed position, insert the red “NO GO” end into the indenter, it can’t pass through completely, otherwise, the selector gear is incorrect.
(CAUTION! DO NOT CRIMP GAGE!)
CRIMPING INSTRUCTIONS
1. Insert the contact and prepare the wire through the indenter from the opposite side.
2. Squeeze the handles together until ratchet releases. Then the handle will return to its open position automatically.
M309 APPLICATIONS
Contact MFG. & Part Number | Contact MFG. & Part Number |
REF EWC | HARTING 09030006213 |
CROUSE HINDS P1315209-210 | CROUSE HINDS P314262-110 |
ROUSE HINDS 1463105-110, -120, 1463106-110, -120 | FCT FMP002P-, 002P-A, ETC. |
FMP002 & -, 002S-A, ETC. | FCT FMP01-, FMP043S |
FCT FMP018S -, FMP043S | FMP018P -, 043P |
CROUSE HINDS 600221 | TYCO 193796-1, 193797-1, 193841-1, 19382-1 |
POSITRONIC *C4008D, *C4012D, *C4016D | M50130A |
T & B 222-14-148 OR HARTING 0903006215 | TYCO 2-194035-2, -4, -5, -7, -8, & 3-19035-1, -0, -3 |
TYCO 194032-5, -7 | SOURIAU 8291-1682, 8-1683N |
CONMED 20063 | NABSON 062095 |
MULTI-CONTACT 32-0100 & 32-0500 | ODU 345 24 2315 401 |
BOSTON SCIENTIFIC CORP. BURNDY CONNECTOR | SODERBER DS0009B |
HYPERTRONICS YPN025-002G, YSK025- 003AH, YPN025-003G, YSK025- 004AH | TYCO 212007-1 / 212008-1, 212013-1 & 212014-1 |
TYCO 194245, 194189 | GM POWERTRAIN SOCKET CONTACT |
TYCO 193846-1 | CONEC 610FET1A |
CONEC 610FET2A | BURNDY JVSP00080B & JVSS00080B |
PERTRONICS YSK025-031 & YPN025-024 | WIELAND Z2 124 9521 0 |
M309 APPLICATIION MARKET
civil aviation & military plan/ helicopter | weapon launcher |
aviation | railway |
physical geography & maritime | manufacturing industry & environmental protection |
Instrument | racing car |
nuclear industry | other fields |
CAUTIONS
1. Keep the crimping tool and other units clean and properly stored when not in use or no operator maintenance.
2. Don’t try to immerse tools in cleaning solution or spray oil into tools to lubricate.
3. If finding anomalies due to the incorrect ways, don’t attempt to disassemble tools or make repairs. Please stop using it and connect us as soon as possible, our company will offer complete refurbishing and recalibration services.