| Spec(mm) |
Thickness(mm) |
Package(m/bale) |
|||
| S5 1.25mpa |
S4 1.6mpa |
S3.2 2.0mps |
S2.5 2.5mpa |
||
| 20 |
2.0 |
2.3 |
2.8 |
3.4 |
120 |
| 25 |
2.3 |
2.8 |
3.5 |
4.2 |
120 |
| 32 |
2.9 |
3.6 |
4.4 |
5.4 |
80 |
| 40 |
3.7 |
4.5 |
5.5 |
6.7 |
60 |
| 50 |
4.6 |
5.6 |
6.9 |
8.3 |
40 |
| 63 |
5.8 |
7.1 |
8.6 |
10.5 |
24 |
| 75 |
6.8 |
8.4 |
10.3 |
12.5 |
16 |
| 90 |
8.2 |
10.1 |
12.3 |
15.0 |
8 |
| 110 |
10.0 |
12.3 |
15.1 |
18.3 |
8 |
| 160 |
14.6 |
17.9 |
21.9 |
26.6 |
4 |
Advantage:
(1) High-Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius.
(2) Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe.
Non-toxic: no heavy metal additives would not be covered with dirty or contaminated by bacterium.
(3) Corrosion Resistant: resist chemical matters or electron chemical corrosion.
(4) Lower Installation Costs: lightweight and ease of installation can reduce installation costs by as much as 50% over the metal piping system.
(5) Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipes.
(6) Long Life: more than 50 years under normal conditions.
(7) Recycled and Environment-friendly.
High Mountain Pipe is dedicated to the manufacturing and sales of various kinds of plastic pipes, fittings, valves, related plumbing equipments, etc. And we can provide professional solution method for complete pipe system. The production and sales volume of leading products of PE water supply pipes and HDPE drainage pipes ranks among the highest in the industry.
The company covers an area of about 200,000 square meters and has 6 workshops, 30 production lines, 300 workers, and 200,000 tons annual ability. It is a comprehensive enterprise integrating science, industry and trade. The industries involved are: research, production, development, manufacturing, and polymer materials of plastic pipes. All products meet the requirements of national inspection standards or enterprise inspection standards.
Q1: May I get one sample before placing order?
Re: Yes,Sample are available. For normal product, samples are for free and you just need to bear the fright; For those high value products, you just need to freight and certain product cost. When we both cooperate for some times or when you are our VIP customer, free sample will be offered when you need.
Q2: Which payment is available for your company?
Re: T/T, L/C or All trade insurance. You can choose the one which is convenient for you.
Q3: How and when can I get my goods after payment?
Re:For small quantity products,they will be delivered to you by international courier(DHL, FedEx,TNT etc.) or by air. Usually it will cost 3-5days that you can get the goods after delivery. For large quantity products, shipping by see is worthwhile. It will cost days to weeks to come to your destination port, which depends on where the ports is.
Q4:Is there any possible to use my appointed label or package?
Re:Yes. If needed, we would like to use label or package according to your requirement.
Q5:How can you guarantee the goods you offer is qualified?
Re: We always believe honesty and responsibility are basis of one company, so whatever products we provide for you all are qualified. We will have goods tested and provide COA before delivery for sure.
Q6:Is the price on this page correct?
Re: The listed price is only for reference, for latest price, pls contact us directly.