Plastic Flower Plant Pot Making Machine,Plastic Thermoforming Machine,Glass Making Machine

 

Main Features:

 

1) The sheet is driven by pin chain and the pin chain is driven by servomotor. The feeding length could be adjusted by parameter setting through touch screen.

2) The stretching of plug inside of up mould is controlled by servomotor.

3) Mould adopts four pillars to fix the mould.

4) It adopts hydraulic system to drive the movement of the mould.

5) Fill oil automatically to lubricate mechanism movement at certain time.

6) Temperature controller modules to control up and down temperature area.

7) It can finish production at one time through sheet feeding, heating, stretching, forming and in-mould cutting.

8) Stable operation and reliable performance, low noise, high quality.

9) Machine frame adopts square bar to make it. Its lifespan will be longer.

10) The movement of heating oven is controlled by touch screen.

11) Waste sheet winder to collect the waste sheet.

 

Machine Technique Parameters:

Model	FJL-SZ-680I	FJL-SZ-680II	FJL-SZ-750I	FJL-SZ-750II
Max.Forming Area	650x320mm		750x420mm
Max.No-Load Speed	35Cycles/min
Running Method	Hydraulic
Oil Pump Motor Power	7.5KW(Double Pump)		15KW(Double Pump)
Cutting Method	Cutting in Mold
Feeding Pattern	Motor With Encode	Servomotor	Motor With Encode	Servomotor
Stretching Method	Motor	Servomotor	Motor	Servomotor
Suitable Material	PP,PS,HIPS,PET,PVC
Sheet Thickness Range	0.2-2mm
Max.Forming Depth	120mm		150mm
Sheet Roll Dia.	800mm
Heater Arrangement	Top + Bottom Heating With IR Ceramic Heater
Electrical Consumption	40kw/h	45kw/h	50kw/h	55kw/h
Overall Power	100kw	110kw	120kw	130kw
Air Consumption	1.5-1.8m³/min,0.6-0.8Mpa		2-2.5m³/min,0.6-0.8Mpa
Machine Size	L3650XW1590XH2500mm		L4000XW1730XH2600mm
Weight	4.4T	4.5T	4.8T	5T
Power Supply	380V/50HZ/3P

 

Samples of products:

 

Machine details as follows:

You Can Send Your Message To Us >>

You Can Send Your Message To Us >>