SPECIFICATIONS
HDX438
| ITEM | UNIT | DATA | ||||
| Injection Unit | Screw Diameter | mm | 75 | 80 | 83 | |
| Screw L/D Ratio | L/D | 22.5 | 21.1 | 20.3 | ||
| Injection Volume | cm3 | 1634 | 1860 | 2002 | ||
| Shot Weight | g | 1488 | 1693 | 1822 | ||
| Injection Pressure | Mpa | 180 | 158 | 147 | ||
| Clamping Unit | Clamping Force | KN | 4380 | |||
| Opening Stroke | mm | 720 | ||||
| Mould Thickness(Min-Max) | mm | 300-780 | ||||
| Space Between Tie-Bars | mm | 765×765 | ||||
| Ejector Force | KN | 125 | ||||
| Ejector Stroke | mm | 200 | ||||
| General | Motor Power | KW | 41 | |||
| Heater | KW | 25 | ||||
| Pump Pressure | Mpa | 16 | ||||
| Machine Dimension | m | 8.1×1.9×2.2 | ||||
| Machine Weight | T | 15 | ||||
| Mould Orientation Ring Diameter | mm | Φ200 | ||||
| Nozzle Radius | mm | SR15 | ||||
HDX538
| ITEM | UNIT | DATA | ||||
| Injection Unit | Screw Diameter | mm | 80 | 85 | 90 | |
| Screw L/D Ratio | L/D | 21.1 | 19.9 | 18.8 | ||
| Injection Volume | cm3 | 2069 | 2336 | 2619 | ||
| Shot Weight | g | 1883 | 2126 | 2383 | ||
| Injection Pressure | Mpa | 178 | 158 | 141 | ||
| Clamping Unit | Clamping Force | KN | 7380 | |||
| Opening Stroke | mm | 780 | ||||
| Mould Thickness(Min-Max) | mm | 300-800 | ||||
| Space Between Tie-Bars | mm | 810×810 | ||||
| Ejector Force | KN | 125 | ||||
| Ejector Stroke | mm | 220 | ||||
| General | Motor Power | KW | 55 | |||
| Heater | KW | 27 | ||||
| Pump Pressure | Mpa | 16 | ||||
| Machine Dimension | m | 8.5×1.9×2.3 | ||||
HDX588
| ITEM | UNIT | DATA | ||||
| Injection Unit | Screw Diameter | mm | 80 | 85 | 90 | |
| Screw L/D Ratio | L/D | 21.1 | 19.9 | 18.8 | ||
| Injection Volume | cm3 | 2211 | 2496 | 2798 | ||
| Shot Weight | g | 2012 | 2271 | 2546 | ||
| Injection Pressure | Mpa | 178 | 156 | 141 | ||
| Clamping Unit | Clamping Force | KN | 5880 | |||
| Opening Stroke | mm | 830 | ||||
| Mould Thickness(Min-Max) | mm | 350-830 | ||||
| Space Between Tie-Bars | mm | 830×830 | ||||
| Ejector Force | KN | 152 | ||||
| Ejector Stroke | mm | 220 | ||||
| General | Motor Power | KW | 55 | |||
| Heater | KW | 30 | ||||
| Pump Pressure | Mpa | 16 | ||||
| Machine Dimension | m | 8.8×2.0×2.4 | ||||
| Machine Weight | T | 20 | ||||
| Mould Orientation Ring Diameter | mm | Φ200 | ||||
| Nozzle Radius | mm | SR15 | ||||
HDX658
| ITEM | UNIT | DATA | ||||
| Injection Unit | Screw Diameter | mm | 85 | 90 | 95 | |
| Screw L/D Ratio | L/D | 21.2 | 20 | 19 | ||
| Injection Volume | cm3 | 2485 | 2786 | 3105 | ||
| Shot Weight | g | 2261 | 2535 | 2826 | ||
| Injection Pressure | Mpa | 182 | 163 | 146 | ||
| Clamping Unit | Clamping Force | KN | 6580 | |||
| Opening Stroke | mm | 920 | ||||
| Mould Thickness(Min-Max) | mm | 350-860 | ||||
| Space Between Tie-Bars | mm | 915×915 | ||||
| Ejector Force | KN | 152 | ||||
| Ejector Stroke | mm | 250 | ||||
| General | Motor Power | KW | 60 | |||
| Heater | KW | 34 | ||||
| Pump Pressure | Mpa | 16 | ||||
| Machine Dimension | m | 9.3×2.2×2.3 | ||||
| Machine Weight | T | 28 | ||||
| Mould Orientation Ring Diameter | mm | Φ200 | ||||
| Nozzle Radius | mm | SR15 | ||||
STANDARD DEVICE
1. Double-cylinder balance injection system 2. Multi-stage pressure & speed injection 3. Back-pressure adjustment device 4. Decompression 5. High speed clamping 6. Low pressure mold protection 7. Multiple hydraulic ejector knock-out 8. Lubrication system 9. Hydraulic pressure full proportional control 10. All computer control system 11. Molding data memory sytem
STANDARD ACCESSORIES
1. Mechanical leveling pad 2. Spare parts 3. Lubrication oil
SELECTABLE
1. Drying hopper 2. Auto-loader 3. Hopper magnet 4. Mold clamps 5. Hydraulic unscrew device 6. Water cooler 7. Mold temperature controller 8. Auto color mixer with measuring device 9. Oil temperature controller 10. Oil bypass filter
ILLUMINATIONS
Theoretics shot capacity=(plastic injector feeder section area)×(screw stroke) Shot weight is 91% PS theoretics shot capacity Plasticizing ability and shot speed are PS value
