Specifications
Energy saving Variable Pump or Servo MotorImported major components
Mechanical, electric & hydraulic safety protection
Features
1. Specially made PET screw highly increases the plasticizing speed and shot weight, lowers the plasticizing temperature and AA value, also lowers the shearing of preform, while achieves better transparency.
2. The variable pump control system can save energy by 20% ~ 30%, whithe the servo motor control system can save energy by 30% ~ 50%.
3. Different models are available for the choice of customers.
4. Increasing eject force eject stroke, adopts PET preform molding.
5. Whole closed safe door meets the requirement of sanitary and thermo-control.
6. Hot runner system interface is included.
7. Optional with pressure holding and charge at the same time, which can increase the output by 15% ~ 25%.
8. Whole production project can be provided, including moulds, injection molding machine, PET stretch blow molding machine and auxiliary equipments.
Parameter
| Description | Unit | PET-1505V2 |
| Injection Unit | ||
| Screw Diameter | mm | 75 |
| Screw L/D Ratio | 22 | |
| Shot Volume | cm3 | 1303 |
| Shot Weight(@PS1.05) | g | 1224 |
| Shot weight(@PET1.3) | g | 1515 |
| Shot weight(@PP0.9) | g | 1049 |
| Injection Pressure | Mpa | 295 |
| Max.screw rotary speed | rpm | 170 |
| Clamping Unit | ||
| Clamping Force | KN | 3300 |
| Opening Stroke | mm | 600 |
| Max daylight: | mm | 1300 |
| Space between Bars(H*V) | mm*mm | 670x670 |
| Movable platen size(H*V) | mm*mm | 985x985 |
| Max. Mold Height | mm | 700 |
| Min. Mold Height | mm | 300 |
| Ejector Stoke | mm | 180 |
| Ejector Force | KN | 184 |
| Ejector-back force | KN | 115 |
| Number of ejector pins | 12+1 | |
| Power Unit | ||
| Hydraulic System Pressure | Mpa | 17.5 |
| Pump Motor Power | KW | 30 |
| Heater Power | KW | 20 |
| Total current | A | 147.5 |
| General | ||
| Oil Tank Capacity | L | 560 |
| Machine Weight | Ton | 10.5 |
| Machine Dimensions(L*W*H) | m*m*m | 7.1x1.62x2.3 |