Polypropylene Vane Type Demister , Vane Mist Extractor With Liquid Sepearator Demister Pad

Delivery Time:20 work days
Certification:ISO9001 : 2008

Production Description

The flat blade system consists of two parallel blades of mist eliminator and three layers of flushing water pipe. The first layer removes coarse particle fog drops, and the second layer removes fine particle fog drops. Critical separation size of flat plate mist eliminator : 28 to 40 um, 40 mm for first degree, 30 mm for secondary .

Flushing system including: nozzle, pipeline and pipe clamp, etc.

Water pipe of mist eliminator is made by anti-corrosive carbon steel or stainless steel. The dimension of nozzle is 316L. The layout form of flushing pipe is the top and bottom side of the first-degree mist eliminator and bottom side of the second-degree mist eliminator. 200% flushing water spray overlap rate ensures demister run with low resistance.

The plate type mist eliminator is crossly made by corrugated shape blade and steel plate. It is installed on top of tower and perpendicular to structure of flue gas. There are two layers of design: first and second level. Flue gas imports into mist layer vertically. Steel plate and the blade are connected with hotgas welding and thermofussion welding. The distance ranges between steel plates is between 520-660mm, which changes according to the distance of channel. The distance between blades is: 40 mm for first level, 25 mm for second level. The general channel span is 1850 mm. The interval between beams is 2185 mm. Three layers of flushing: two upward in the front of the mist eliminator, one downward on the back of mist eliminator. The interval between two-stage mist eliminator ranges between 1800-1950mm. Washing up and down two layers of first-degree mist eliminator, washing up one layer of second-degree mist eliminator. No need to wash the back part.(as shown)

Types

Accessories