PVC Window Machine/Extruder Machine Plastic/Wood and Plastic Profile Production line
Specification
a) Installed power: 220v/3P/60Hz
b) Raw material: PVC/PE+wood owder
c) Output:30kg/h
Note:the output is different depends on operation and material.
d) centre height of extruder: 1000 mm±50mm(adjustable)
e) operation direction: from right to left
f) cooling water:≤5-20°C ≥0.3Mpa ~2.5T/h
g) compression air: 1.5m3/min >0.5MPa
Configuration
| ITEM | AMOUNT |
| Double conical screw extruder | 1 |
| Mould | 1 |
| Vaccume calibrating cooling table | 1 |
| Hall-off machine | 1 |
| Non-dust cutter | 1 |
| Stacker | 1 |
| Conrolling system | 1 |
Parameters
1,SJ65/132 twin conical screw extruder
Screw structure:optimized special model
Barrel structure: with special forced feeding groove In feeding sections
Material of screw and Barrel: 38CrMoAIA
Nitrogen layer depth of screw and barrel: 0.4-0.7mm, the brittleness not more than 2th grade
Main Technical Parameters
Item | SJSZ 65/132 | SJSZ 80/156 | SJSZ 92/188 |
Screw Diameters(mm) | 65mm/132mm | 80 | 92 |
L/D Ratio | 22:1/25:1 | 22:1/25:1 | 22:1/25:1 |
Output(Kg/h) | 120-240 kg/h | 250-350 | 400-500 |
Main Driving Power(kw) | 37 | 55 | 110 |
Heating Powder(Kw) | 4 zones, 20Kw | 5 zones, 38Kw | 6 zones, 54Kw |
2,Mould
a) Structure: special design for plastic profile
b) Materials: 40Cr, high quality alloy
c) The die flow channel is chrome plate, polishing treatment
3,Vaccume calibrating table
Calibrating table: 6000mm
Vacuum pump qty: 2units
Vacuum pump power: 4kw/unit
4,Puller and Cutter
Speed-drawing: 0-5m/min
Pressed tightly mode: pneumatic
Max. force-drawing: 30KN
Max clamped forced: 20KN
5,Stacker
Length can be overturned: 6000mm
Mode-overturning: synchronous with puller and cutter, and can length-measuring cut and overturn
6,Controlling system
a) Temperature control: OMRON,Japan
b) Contactor: Schneider from France
c) Inverter: ABB from Japan
Detail machine pictures or equipment producing
Wood plastic machine sample
Before we send you quotaion, we hope to get the following information:
1. If you are interested in PIPE making machine, pls send us your pipe diameter specification and thickness requirements.
2. If you are interested in PROFILE making machine, pls tell detial size or give product drawing.
3. If you are interested in PERFORATION MACHINE, pls tell the material, mateiral width, material thickness, hole diameter, hole layout(Diamond or square), as well as holes distance between holes.
4. If you are interested in our professional SPIRAL WRAP MAKING MACHINE, Pls send us detail diameter specification or detail drawing.
5. Pls send us some sample pictures for us reference.
If you have other special requirements, pls tell.