2015 China manufaturer of new wholesale dehumidifier products
Features of 2015 China manufaturer of new wholesale dehumidifier products 1.High preformance with Japanese Nichias honeycomb rotating wheel for dehumidification 2.Ability to get the ultra low temperature(low dew point)air 3.Easy to absorb the moisture in the hot air (Different from the other adsorbents,its adsorptive capacity can be well at 100°C). 4.Ability to absorb moisture of low temperature air (Low temperature air , such as high pressure air , the good moisture absorbance can make the ultra low temperature air.) 5.Easy maintenance 6.Ability to wash in the water, It can be used again after wash to remove the gray scale. |  |
Features of 2015 China manufaturer of new wholesale dehumidifier products
1.High preformance with Japanese Nichias honeycomb rotating wheel for dehumidification
2.Ability to get the ultra low temperature(low dew point)air
3.Easy to absorb the moisture in the hot air (Different from the other adsorbents,its adsorptive capacity can be well at 100°C).
4.Ability to absorb moisture of low temperature air (Low temperature air , such as high pressure air , the good moisture absorbance can make the ultra low temperature air.)
5.Easy maintenance
6.Ability to wash in the water, It can be used again after wash to remove the gray scale.
Introduce about JKE dehumidifier systems
JKE dehumidifier systems operate on the principle of adsorption of water vapor from the air. The desiccant used is silica gel, arranged in a wheel-shaped rotor having thousands of small air passages.
The desiccant wheel is housed in a cabinet that is separated into process and reactivation sections In the process section, wet air passes through the wheel, where the silica gel adsorbs the moisture. This dehumidifying process increases air temperature; And the leaving air is drier and warmer.
To drive the moisture out of the desiccant, the wheel slowly rotates into the reactivation section, where a second (heated) air stream passes through the desiccant. The moisture from the desiccant is evaporated and the moisture-laden reactivation air is exhausted outside. The wheel cycles back into the process section where the reactivated desiccant provides continuous drying of the process air.
APPLICATIONS of 2015 China manufaturer of new wholesale dehumidifier products :
It can be widely used in following situations: Yeast Sorbitol Sugar substitutes Gelatine Seafood drying Cold stores Clean rooms Food production Seed storage Pharmaceutical production, packaging, storage, testing and research Lithium battery production Electronics production Glass manufacture Shipbuilding Rubber industry Aerospace
| Model No. | Unit | RO-5-D | RO-10-D | RO-20-D | RO-30-D | RO-50-D | RO-75-D | ||||
| Overall performance unit | Rated air flow | m 3 /h | 500 | 1000 | 2000 | 3000 | 5000 | 7500 | 10000 | 15000 | |
| Dehumidification space | m 3 | 38 | 60 | 100 | 150 | 230 | 350 | 420 | 500 | ||
| Environment personnel limit | number | -- | 2 | 4 | 7 | 15 | 34 | 70 | 100 | ||
| refrigerating output | KW | 30 | 46 | 65 | 82 | 104 | 167 | 202 | 315 | ||
| Excess pressure | Pa | 200~ | 200~ | 200~ | 200~ | 200~ | 200~ | 200~ | 200~ | ||
| 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | ||||
| Noise | dB(A) | 62 | 65 | 67 | 69 | 72 | 75 | 77 | 79 | ||
| Temperature range and accuracy | 18~26± 1 degrees | ||||||||||
| Humidity range and accuracy | 0.2~1% | ||||||||||
| Power supply | 380V 50HZ Three-phase four wire | ||||||||||
| Dehumidification system | Wheel type | Silica gel molecular sieve composite wheel | |||||||||
| Regeneration system | Electrical heating | KW | 9 | 21 | 39 | 61 | 101 | 149 | 196 | 286 | |
| Steam | Kg/h | -- | 36 | 67 | 104 | 172 | 254 | 333 | 486 | ||
| Energy efficiency | KW | -- | -- | 30 | 45 | 76 | 112 | 147 | 206 | ||
| Regeneration fan power | KW | 0.18 | 0.37 | 0.75 | 1.1 | 1.5 | 2.2 | 3 | 5.5 | ||
| Refrigeration system | Compressor | Form | Imported closed | Imported closed | Imported closed | Imported closed | Imported closed | Imported closed | Imported closed | Imported closed | |
| Number | Sets | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | ||
| Power | KW | 4.97× 2 | 7.91× 2 | 10.2× 2 | 14× 2 | 17.7× 2 | 22× 2 | 33× 2 | 46.4× 2 | ||
| Evaporator form | Copper tube sets of hydrophilic aluminum fins | ||||||||||
| Refrigerant | Mode | R22 | |||||||||
| Throttle | Thermal expansion valve | ||||||||||
| Processing fan power | KW | 1.5 | 2.2 | 3 | 4 | 5 | 7.5 | 13 | 15 | ||
| Weight | Kg | 1300 | 1800 | 2360 | 2780 | 3300 | 3960 | 4500 | 5200 | ||
| Dimension | mm | 4300× 1500× 2200 | 5000× 1700× 2320 | 5600× 1860× 2500 | 6500× 2000× 2650 | ||||||
| Remark | 1. Rated conditions: dry-bulb temperature33degrees wet- bulb temperature28 2. Steam regeneration pressure: 0.4Mpa; 3. Wheel surface wind speed: 2-4m/s; 4. Large specifications can be split in the site-site installation; production of special specifications can be customized; 5. Equipment parameters are subject to change without notice. | ||||||||||
Payment Term :
1.T/T ,50% as deposite and the balance to be paid before shipment
2.L/C is also acceptable.
3.per your special requests are also welcome for discussion.
Why us
1.Water Chiller Manufacture
2.Water Chiller Factory
3.ISO SGS CE Certificate
4.one year warranty
5.over ten years experience