Specifications
pallet blow moulding machine1,CE Certification
2,Advanced technology
3,Good after-sale service
4,Competitive price
ABLD120 automatic pallet blow moulding machine was specially designed for making plastic water tanks,plastic cans, lubricant oil bottles,plastic drums, plastic toys and other plastic containers not over 160L.
The features of this pallet blow moulding machine :
(1)It is suitable for producing PE,HDPE,PP, PVC so on,plastic containers and bottles in all shapes are available,the max.product volume is up to 160L.
(2)Single station single die head design,very easy to operate and maintenance.
(3)Most components of the blow moulding machine are from famous world brand.
(4)Fully automatic process with low power consumption,high efficiency,quick and safe operation,easy for maintenance.
(5)Accumulation die head,MOOG parison controller equipped.
(6)Bottom blow technology make the product perfect.
(7)Auto lubricant system controlled by PLC.
Main parts of Machine | Picture | Explanation |
Oil Pump |
|
Oil pump From Japan YUKEN driving the machine |
Computer control system (PLC) |
|
Japanese Mitisubishi PLC
Used to control all electrial components and touch screen |
Parison controllor |
|
MOOG parison Controllor Control the thickness of products |
Die head |
|
Accumulation die head |
Manipulator |
|
Manipulator will Take the finished Product out automatically |
Electric Cabinet |
|
This part is the full electric components of the machine |
Technical Parameters: ( ABLD120 )
Max. Product volume | 160 liters |
Output capacities | 18~25 pcs/h |
Screw diameter | 120mm |
Screw L/D ratio | 28 L/D |
Screw drive power | 75 KW |
Screw heating capacity | 30 KW |
No.of heating zone | 5 zones |
Output of HDPE | 240 KG/H |
Oil pump drive power | 45 KW |
Clamping force | 800 KN |
Max.size of mold | 1000X1500mm |
Mold stroke | 600-1500mm |
Max.die diameter | 520mm |
Die heating power | 12 KW |
Die heating segments | 5 zones |
Blowing pressure | 0.8mpa |
Air volume | 1.6 M³/MIN |
Cooling water pressure | 0.3mpa |
Water consumption | 180 L/MIN |
Technical Parameter of YJBA120-220L
Plasticzing System | |
Specification | good plasticizing capability, high output, transducer adjust speed, collect temperature-control signals to prevent the screw from cold starting |
Speed Reducer | hard-teeth, low noise & wear-resistant speed reducer |
Machine Barrel Screw | 120mm,L/D=30, 38CrMoALA high quality nitrogen steel |
Plasticizing | 350Kg/H |
Heating Zone | 6 Zone Casting, aluminum heater |
Heating Power | 135W |
Extrusion Motor | three phase DC motor (380V,50HZ),110KW |
Lifting system | Four turbo lifting |
Extrusion System | |
Specification | Accumulator die head |
Die Head | 38CrMoALA high quality nitrogen steel |
Accumulator capacity | 22Lwith weight 15kg |
Max. Dia. of Die Head | 550mm |
Heating Zone | 30kw |
Parison adjust | Core can be move up and down |
Open and Clamping System | |
Specification | Gear wheel and rack in-phase aim at twin shaft clamping device, and cylinder |
ClampingForce | 800KN |
Mold Move Stroke | 700~1600mm |
Mold platen Dimension | W×H:1100×1550mm, three sets of holes in the mold platen for installing the mold |
Method of install mold to platen | M24 screw |
Electric Control System | |
Specification | Standard PLC and colorful touch screen for blow molding machine |
Touch Screen | Colorful touch screen, auto alarm, diagnose thesystem |
Temperature controller | JapanOmron |
Action control | Japan Mitsubishi, programmable PLC |
Protection Function | Automatic alert and breakdown feedback double protection of mechanical apparatus |
Hydraulic System | |
Specification | Proportion pressure controller changing direction quickly and softly |
Oil pump motor | three phase a synchronism (380V,50HZ),55KW |
Hydraulic pump | Variable pump YUKEN |
Hydraulic valve | imported hydraulic components |
System pressure | 100kg/CM2 |
Pipes | Bilayerhighpressureblast pipes |
Cooling Mode | Water cool and oil cooler separately |
Pneumatic System | |
Specification | imported famous brandpneumaticpressure |
Air Pressure | 0.6Mpa |
Air Consumption | 0.8M3/min |
Valve | GERMANYFESTO |
Cooling System | |
Specification | mold,barrel,oil box adoptindependentcooling waterway |
Cooling Medium | water |
Water Consumption | 300L/min |
Water Pressure | 0.3-0.6MPa |
Blowing method | Multi functional bottom blow mechanism |