Specifications
1. 20 years of experience in blow molding machine2.Deflashing system
3.Famous brand component
4.TWO YEAR warranty
Products display:
Main Characteristic:
1. Single station, single layer, 65mm screw, 15kw motor, PE / PP etc.
2. Power supply: 380VAC, 50Hz (depending on client's country).
3. Different Die Head for Choosing:
One die head (1L-2L): 2L around 300 bottles per hour
Two die head (500ml-1L): 1L around 800 bottles per hour
Three die head (200-500ml): 500ml around 2000 bottles per hour
4. Center Distance: Two Die head: 180mm,
Three Die head: 100mm
Four Die hear: 60mm
5. Deflashing system: Neck/ handle/ bottom deflashing
Deflashing device:
A. one desing of deflashing(rolling knife)
B. another desing of deflashing(punching knife)
C. Bottom cutting
Basic working theory:
This kind of blow molding machine is using PLC control system, operating manual in English, pneumatic operated, clamping by hydraulic cylinders actuated by pneumatic primary cylinders. Moreover, it equips with deflashing system, resulting in saving time and manual cost for clients.
Our machine adopts famous brand in most component parts, almost from GERMANY, JAPAN, FRANCE, TAIWAN
Electirc system:
PLC control:
| Technical Specification |
| Item | Unit | TVD-1L/II/III/IV/V/VI/VII | TVD-2L/II/III/IV/V/VI/VII | TVD-5L/II/III/IV/V/VI/VII |
| Raw Material | - | PEPPPVCEVA…… | PEPPPVCEVA…… | PEPPPVCEVA…… |
| Diameter of primary screw | mm | 55 | 55 | 55 |
| Diameter of secondary screw | mm | 35 | 35 | 35 |
| L/D of primary screw | - | 25:1 | 25:1 | 25:1 |
| L/D of secondary screw | - | 25:1 | 25:1 | 25:1 |
| Extrusion power of primary screw | kw | 7.5 | 7.5 | 7.5 |
| Extrusion power of secondary screw | kw | 2.2*2 | 2.2*2 | 2.2*2 |
| Heating power of primary screw | kw | 7 | 7 | 7 |
| Heating power of secondary screw | kw | 4.5*2 | 4.5*2 | 4.5*2 |
| Plasticizing capacity | kg | 50 | 50 | 50 |
| Number of moulds | piece | 2 | 2 | 2 |
| Mould thickness | mm | 130-150 | 130-150 | 130-150 |
| Open stroke | mm | 110 | 110 | 110 |
| Mould length | mm | 100-280 | 100-280 | 100-280 |
| Max.clamping force | KN | 30 | 30 | 30 |
| Number of molding head | piece | 1-3 | 1-3 | 1-3 |
| Preasure of air source | Mpa | 0.6 | 0.6 | 0.6 |
| Air consumption | m3/mim | 0.4 | 0.4 | 0.4 |
| Water consumption | m3/h | 1 | 1 | 1 |
| Weight | T | 2.3 | 2.3 | 2.3 |
| Dimension | m | 2.6*1.6*1.8 | 2.6*1.6*1.8 | 2.6*1.6*1.8 |
| Output |
| Raw Material | Volume(ML) | TVD-1L/II/III/IV/V/VI/VII | TVD-2L/II/III/IV/V/VI/VII | TVD-5L/II/III/IV/V/VI/VII |
| PE | 500 | 1000 | 1500 | 2000 |
| PE | 1000 | 500 | 800 | 1200 |
| PE | 2000 | -- | 300 | 600 |
| PE | 5000 | -- | -- | 180 |
After-sale service:
1. Instruction for Installation and Debugging
Before delivery, TONVA takes responsible for debugging of machine, in order to make sure the provided machine could be safely and smoothly put into operation.
TONVA also take responsibility to have debugging overseas, and Client abroad please sends invitation forward of time to engineer of TONVA, provides the engineer with round-trip tickets, accommodation, vehicle and $60 per day salary.
2. User Training
Before delivery, TONVA will take responsibility to indoctrinate technical training to the users so that they could understand the machine features and could operate the machine by themselves.
3. Warranty Period
The warranty period for TONVA machine is one year with a life long maintenance. If the user requires special quality guarantee, other stipulated warranty period may be made after mutual agreement.